Barrow · BS-ASA5090-PA
Full-cover water block for ASUS ROG Astral RTX 5090
The Barrow BS-ASA5090-PA is a full-cover GPU water block for select ASUS ROG Astral RTX 5090 and RTX 5090 D graphics cards. It replaces the card’s factory cooler and connects to a custom loop through G1/4 ports. The copper cold plate draws heat from the GPU core, memory, and power delivery components.
Fits
Select ROG Astral 5090 / 5090 D
Compatibility
Barrow’s compatibility table lists these ASUS ROG Astral cards.
- ✓ASUS ROG-ASTRAL-RTX5090-O32G-GAMING
- ✓ASUS ROG-ASTRAL-RTX5090D-O32G-GAMING
- ✓ASUS ROG-ASTRAL-RTX5090D-32G-GAMING
- ✓ASUS ROG-ASTRAL-LC-RTX5090D-O32G-GAMING
- ✓ASUS ROG-ASTRAL-LC-RTX5090D-32G-GAMING
Before ordering, verify the full model on your card’s label and compare its PCB layout and mounting holes with Barrow’s compatibility information. Pay close attention to the LC, D, and O32G identifiers.
ASUS ROG Astral RTX 5090 OC Edition with its factory cooler. ASUS product image.
Design Highlights
Full-cover copper cold plate
The copper cold plate cools the GPU core, memory, and power delivery components. The clear acrylic top lets you see the coolant path.
Jet microchannels at the GPU core
Barrow describes up to 43 jet microchannels in the block’s three-layer GPU core section.
Black or white aluminum backplate
Both options include a matching aluminum alloy backplate that screws onto the rear of the PCB. The clear acrylic top and Barrow LRC 2.0 lighting are the same on both versions.
Key Specifications
| Model | BS-ASA5090-PA |
|---|
| Black backplate SKU | BS-ASA5090-PA-BK |
|---|
| White backplate SKU | BS-ASA5090-PA-WT |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Aluminum alloy |
|---|
| Cooling coverage | GPU core, memory, and power delivery components |
|---|
| Microchannel grooves | 0.5 mm groove width, 0.3 mm spacing |
|---|
| Port thread | G1/4 inlet and outlet |
|---|
| Block size (L × W × T) | 258.8 × 156.9 × 24.2 mm max. |
|---|
| Lighting | Barrow LRC 2.0, 5V 3-pin ARGB |
|---|
Barrow’s top and side views. Measurements are in millimeters. The side view shows 23.2 mm and 24.2 mm thickness at different points.
Which Version Do I Need?
Choose the water block by the exact model on your graphics card label.
Barrow BS-ASA5090-PATHIS PAGE
Choose this block for an ASUS ROG Astral card listed above.
If you have an ASUS TUF RTX 5090, check the PCB list for this TUF-specific block.
If you have a Palit RTX 5090 GameRock or GameRock OC, check this Palit-specific block.
What's in the Box
1 × full-cover GPU water block1 × aluminum alloy backplate2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Power off the PC, remove the graphics card, and take off its factory cooler.
2Clean off the old thermal material. Fit thermal pads at the raised contact points that match your PCB, and apply your own thermal paste to the GPU core.
3Align the block and backplate with the PCB mounting holes and fasten them with the supplied hardware.
4Follow the block’s inlet and outlet layout when attaching your G1/4 fittings. Close the unused ports with the stop plugs.
5Leak-test the loop before powering on the graphics card.
For the loop, you also need a pump, a reservoir, a radiator with fans, coolant, and tubing with matching G1/4 fittings.
Barrow’s example shows the pad contact areas around the GPU core. Match pad placement to your PCB and the cold plate’s contact points.
FAQ
Which ASUS ROG Astral RTX 5090 cards fit?
Match the full ASUS model on your card’s label to the Compatibility list and verify the PCB layout before ordering.
Can I use the block on an Astral LC card?
Barrow lists the two Astral LC RTX 5090 D models in the Compatibility section for a custom-loop conversion.
Are the fittings for connecting tubing in the box?
The box includes two stop plugs for unused ports. Supply your own G1/4 fittings sized for your tubing.
How do I connect the block’s lighting to my motherboard?
Use a separately purchased ARGB adapter cable and a compatible 5V 3-pin ARGB header. Keep the cable off 12V 4-pin RGB headers.
Notes- Check your card model and PCB before installation. For return eligibility, see FormulaMod’s Returns & RMA policy.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.