GPU Water Block 360° Rotary Bridge – Barrow BSQT360-01

Barrow · BSQT360-01

360° rotary bridge for a GPU water block

The Barrow BSQT360-01 replaces the stock terminal on a Barrow BHI GPU water block so you can change how the tubes leave the block. Its two right-angle elbows swivel through 360°, letting you aim each connection along your planned tubing route. Both ports have G1/4 female threads.

Fits
Barrow BHI water blocks
Swivel
360°
Ports
2 × G1/4 female

Fits / Use with

For Barrow GPU water blocks with a BHI terminal mount.

  • ✓G1/4 male loop fittings

Check the terminal standard on your exact water-block model before ordering.

Key Specifications

ModelBSQT360-01
Base / elbowsPOM / H59 brass
Port threads2 × G1/4 female
Elbow designRight-angle, 360° swivel
Dimensions (L × W × H)78.50 × 20 × 28.20 mm
Mounting-hole pitch32.60 mm between adjacent holes
Port spacing32.60 mm center to center
Finish optionsBlack or shiny silver elbows, both with a black base

What's in the Box

1 rotary terminal set

Installation & Use

1
If the block is already in a loop, turn off and unplug the PC, drain the loop, and disconnect the tubing from the stock terminal.
2
Lift the label from the stock terminal with tweezers to access the screws.
3
Remove the screws and lift off the stock terminal. Keep any square nuts in place.
4
Press the rubber seals into the grooves on the replacement terminal, then secure it with the mounting screws.
5
Aim the elbows, connect the loop with G1/4 male fittings, and check for leaks before powering the system.

FAQ

Will it fit my GPU water block?

Choose it for a Barrow GPU water block that uses a BHI terminal mount. Check the water-block model and its terminal standard before ordering.

What is silver on the Silver option?

The two elbows have a shiny silver finish. The terminal base is black on both options.

Notes
  • In case of product appearance structure upgrade, without further notice, in kind prevail.