Barrow · TX360PZ Series / TX360PX-21

G1/4 rotary offset fittings for lining up water cooling tubing

These Barrow rotary offset fittings move a G1/4 connection sideways in a custom PC water cooling loop so you can line up your tubing. Each adapter has a male thread and a female port. Choose a 6, 15, or 21 mm offset based on where your tube needs to land.

Fits
G1/4 ports and fittings
Port Offset
6, 15, or 21 mm
Base Rotation
360°

Fits / Use With

  • ✓A G1/4 female port on a component in your custom water cooling loop
  • ✓A separate G1/4 male tube fitting sized for your hard or soft tubing

Before ordering, check the port spacing and clearance around the adapter and tube fitting.

Design Highlights

Move the port 6 mm sideways

The TX360PZ and TX360PZ-P shift the connection by 6 mm. Rotate the base to aim the offset in the direction of your tube run.

Two material options at 15 mm

The TX360PZ-15 V2 is brass. The TX360PZ-15P V2 uses POM and brass. Both place the female port 15 mm from the male thread’s centerline.

Aim the outlet on the 21 mm version

On the TX360PX-21, the base and outlet head swivel independently. Turn the head to set the outlet at an angle, including 45° or 90°.

Key Specifications

ThreadsG1/4 male to G1/4 female
TX360PZ6 mm offset · Brass
Black, white, or shiny silver
TX360PZ-P6 mm offset · POM and brass
Black
TX360PZ-15 V215 mm offset · Brass
Black, white silver, or shiny silver
TX360PZ-15P V215 mm offset · POM and brass
Black
TX360PX-2121 mm offset · H59 brass
Black or shiny silver
6 mm versions24 mm long · 17.5 mm high
15 mm versions33 mm long · 21.3 mm high
21 mm version39.5 mm long · 29.3 mm high in the illustrated position
Height referenceHeights exclude the protruding male thread

Barrow’s TX360PX-21 drawing. Dimensions are in millimeters.

Which Version Do I Need?

Choose based on whether your tube run needs a sideways shift, more height, or a fixed-angle turn.

Barrow TX360PZ Series / TX360PX-21THIS PAGE
Choose 6, 15, or 21 mm to shift a port sideways. The TX360PX-21 also lets you angle the outlet.
Choose this 15 mm extender to raise the connection along the same centerline.
Choose this G1/4 elbow for a fixed 90° turn. Rotate the base to aim the elbow.

What's in the Box

1 × Barrow rotary offset fitting in the selected model and finish

Installation & Use

1
Check the sideways offset your tube run needs and leave room for the adapter and tube fitting.
2
Thread the adapter’s male end into the component’s G1/4 female port.
3
Rotate the base to position the offset. On the TX360PX-21, also turn the outlet head to aim the connection.
4
Thread your tube fitting into the adapter’s female port and connect the tubing.
5
Leak-test the completed loop before powering the PC components.

You also need a G1/4 male tube fitting that matches your tubing.

FAQ

What does the offset measurement mean?

It’s the sideways center-to-center distance between the G1/4 connections. The model options provide 6, 15, or 21 mm of offset.

Can I use this fitting with hard or soft tubing?

Use a separate G1/4 male tube fitting matched to your tubing type and diameter. It screws into the adapter’s female port.

Is the 21 mm fitting also a 90-degree elbow?

The TX360PX-21 has a swiveling outlet head that can be set at 90° or 45°.

Is there a white Barrow G1/4 offset fitting?

Yes. Choose the 6 mm TX360PZ in white. The 15 mm brass TX360PZ-15 V2 also has a white silver option.

Notes
  • In case of product appearance structure upgrade,without further notice,in kind prevail