ZOTAC RTX 4090 Water Block with Backplate for Trinity OC and AMP Extreme AIRO | Barrow BS-AIC4090-PA

Barrow · BS-AIC4090-PA

Full-Cover GPU Water Block with Backplate

The Barrow BS-AIC4090-PA replaces the stock cooler on supported ZOTAC and Manli RTX 4090 cards so they can run in a custom liquid-cooling loop. Its copper cold plate draws heat from the GPU core, memory, and power delivery components. The block has a clear acrylic top and comes with a black or white aluminum backplate.

Fits
Select RTX 4090 cards
Ports
G1/4
Lighting
5 V ARGB
Backplate
Black or white

Compatibility

Graphics cards listed by Barrow for BS-AIC4090-PA

  • ✓ZOTAC GeForce RTX 4090 Trinity OC (ZT-D40900J-10P)
  • ✓ZOTAC GeForce RTX 4090 AMP Extreme AIRO (ZT-D40900B-10P)
  • ✓ZOTAC GeForce RTX 4090 AMP Extreme AIRO White Edition (ZT-D40900K-10P)
  • ✓ZOTAC GeForce RTX 4090 Aurora OC (天启 OC)
  • ✓ZOTAC GeForce RTX 4090 D PGF
  • ✓Manli GeForce RTX 4090 Gallardo

Check your exact card model and PCB layout against Barrow’s compatibility information before ordering.

Four of the compatible ZOTAC cards, shown with their stock coolers.

Key Specifications

ModelBS-AIC4090-PA
Cold plateCopper
TopClear acrylic
Block dimensions221 × 144.1 × 24 mm (L × W × max. thickness)
Port threadG1/4
BackplatePassive aluminum alloy, black or white
LightingBarrow LRC 2.0. Connects to a 5 V, 3-pin ARGB motherboard header via a sync adapter cable.

What's in the Box

1 × GPU water block1 × backplate in the selected color2 × G1/4 stop plugsMounting hardwareThermal pads

A light controller or light sync cable is included only if you select the corresponding add-on option.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the graphics card’s stock cooler and backplate. Clean off the old thermal compound and pads.
2
Place the thermal pads at the block’s contact points for your card and apply your own thermal paste to the GPU die.
3
Align the block and backplate with the PCB mounting holes and secure them with the mounting hardware.
4
Connect the tubing to the indicated inlet and outlet and plug the unused ports. Leak-test the loop before powering the graphics card.

You’ll need a custom liquid-cooling loop and G1/4 fittings sized for your tubing.

FAQ

Does the 4090 water block include a backplate?

Yes. It includes a passive aluminum backplate in your choice of black or white.

How thick is the block?

Barrow’s drawing shows a maximum block thickness of 24 mm.

How do I connect the lighting to my motherboard?

Connect the sync adapter cable only to a 5 V, 3-pin ARGB header. The cable is an add-on option.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.