Barrow · ASSGX601-SDB V2
Distro plate for the ROG Strix Helios GX601
The Barrow ASSGX601-SDB V2 is a frosted acrylic distribution plate for the ASUS ROG Strix Helios GX601 case. Its internal channels route coolant through a single-GPU custom loop, giving the tubing a shared routing point. Mount the plate with the included screws and leave them loose until the tubing is laid out.
Fits
ROG Strix Helios GX601
Lighting
5V addressable RGB
Compatibility
- ✓ASUS ROG Strix Helios GX601
Barrow specifies the GX601 case for this plate. Check the model on your case before ordering.
Key Specifications
| Model | ASSGX601-SDB V2 |
|---|
| Plate material | Frosted acrylic |
|---|
| Loop layout | Single GPU |
|---|
| Lighting | Barrow LRC 2.0, 5V 3-pin ARGB |
|---|
| Mounting | Screws |
|---|
What's in the Box
Distribution plate with built-in removable lightingManual lighting controller5V 3-pin motherboard ARGB adapter cableMounting screws
Complete-loop photos are for installation reference.
Installation & Use
1Use the mounting screws to hold the plate loosely in place.
2Lay out the tubing for your loop with the plate in position.
3Tighten the mounting screws once the tubing layout is complete.
FAQ
Is this plate designed for a single-GPU loop?
Yes. Barrow specifies a single-GPU setup for the Helios GX601.
Can I sync the lighting with my motherboard?
Use the included adapter cable to connect the Barrow LRC 2.0 lighting to a compatible 5V 3-pin ARGB header on your motherboard.
Notes- As Barrow upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc.,
If not notified in time, the Barrow's latest real object shall prevail