Barrow · SPD10-T
Mini pump and reservoir for compact water cooling loops
The Barrow SPD10-T combines a 10 W PWM pump and a coolant reservoir in a single unit for compact PC water cooling loops. It circulates coolant through a custom loop and lets you mount the pump and reservoir together when space inside an ITX case is limited.
Fits / Use With
- ✓G1/4 fittings for the loop connections
- ✓Motherboard PWM header for pump speed control
- ✓120 mm fan mounting location when using the optional bracket
Check the clearance around the pump and reservoir body, including room for fittings and tubing bends.
Design Highlights
Clear acrylic reservoir
The clear reservoir lets you track the coolant level as you fill and bleed the loop.
CNC-machined pump housing
The aluminum alloy housing helps carry heat away from the pump as it runs.
Key Specifications
| Model | SPD10-T |
|---|
| Materials | Acrylic reservoir, aluminum alloy pump housing |
|---|
| Body (H × W × D) | 112.40 × 69.60 × 40 mm |
|---|
| Unit weight | 280 g |
|---|
| Ports | 3 × G1/4 |
|---|
| Rated voltage | 12 V DC |
|---|
| Rated current | 0.8 A |
|---|
| Rated power | 10 W |
|---|
| Pump speed control | PWM signal lead for a 4-pin motherboard header |
|---|
| Maximum speed | 4,000 RPM |
|---|
| Maximum flow | 450 L/h |
|---|
| Maximum head | 3 m |
|---|
| Noise | <50 dB (Barrow spec) |
|---|
Unlabeled arrows mark the three G1/4 ports. Dimensions are in millimeters.
Which Version Do I Need?
Barrow SPD10-TTHIS PAGE
Choose this 10 W pump with a built-in reservoir when both need to fit in the same spot.
Choose this standalone 10 W PWM pump if your loop uses a separate reservoir.
Choose this mini pump and reservoir combo if your build calls for the 17 W model.
What's in the Box
1 × SPD10-T pump and reservoir1 × mounting bracket (optional bundle)
Both black and white are available with or without the mounting bracket.
Black pump and reservoir shown with the bracket option.
Installation & Use
1Choose a mounting spot with room for the body, fittings, and tubing. Secure the unit with the pump inlet facing up so coolant can feed the pump by gravity.
2Identify the inlet and outlet before routing the loop. Connect the tubing using G1/4 fittings and seal unused ports.
3Connect the pump’s power lead to a suitable 12 V DC supply. Connect its PWM signal lead to the appropriate motherboard header.
4Fill the reservoir before starting the pump. Keep coolant feeding the pump as you bleed air to prevent it from running dry.
5Leak-test the loop with the rest of the PC unpowered. Once the loop passes the test, power on the PC and set the pump header to PWM mode in BIOS.
To complete the loop, have G1/4 fittings and stop plugs, compatible tubing, a radiator, water block, and coolant ready.
Bracket attachment shown. Mount the pump with its inlet facing up.
FAQ
How much room does the SPD10-T need?
The pump and reservoir body is 112.40 mm tall, 69.60 mm wide, and 40 mm deep. Allow additional space for fittings and tubing.
Do I need the bracket option?
Choose it if you plan to mount the pump and reservoir at a 120 mm fan position. Both colors can also be ordered without the bracket.
How do I control the pump speed?
Connect the PWM signal lead to the 4-pin motherboard header and set that header to PWM mode in BIOS.
What are the maximum flow and head?
Barrow lists a maximum flow of 450 L/h and a maximum head of 3 m.
Notes- Barrow may change the product’s appearance without notice. The unit you receive may look different from the photos.