Description
The Barrow TXDJZ-A01 is a straight G1/4 female-to-female adapter for custom PC water cooling. It joins two male-threaded G1/4 fittings end to end. Its 360° swivel lets you turn one end to line up a connected fitting during assembly. The black body is made of H59 brass.
Use one male G1/4 fitting at each end.
Check the thread size and whether both mating ends have external threads before ordering. For a tubing connection, choose separate tube fittings that match your tubing and have male G1/4 threads.
Turn one end around the centerline of the adapter to position the attached fitting. The two ports stay in line as the joint turns.
The knurled surface gives you a textured grip while threading the adapter onto a mating fitting. The black fitting has an H59 brass body.
| Model | TXDJZ-A01 |
|---|---|
| Port threads | G1/4 female on both ends |
| Body material | H59 brass |
| Body length | 19.20 mm |
| Outside diameter | 18 mm |
| Rotation | 360° around the centerline |
| Color | Black |
Check the thread ends and the direction your loop needs to run.
Have the two matching male G1/4 fittings on hand.
Both ends have G1/4 internal threads. Each accepts a G1/4 male fitting.
One end swivels relative to the other around the fitting’s centerline. The connection stays straight.
The adapter connects to G1/4 male fittings. Choose a tube fitting with a male G1/4 thread that matches your tubing type and size.
Barrow’s drawing shows a body length of 19.20 mm and an outside diameter of 18 mm.