Barrow · BA-STKA
Soft tube fitting kit for custom PC water cooling
The Barrow BA-STKA is a soft tube fitting kit for connecting G1/4 components in a custom PC water cooling loop. Choose the version that matches your tubing’s nominal inner and outer diameters. The kit includes soft tubing, straight compression fittings, 90° adapters for turns at the ports, and stop plugs for unused ports.
Fits
10 × 13 or 10 × 16 mm soft tubing (nominal)
Adapters
90° male to female
Use With
Check the port thread and your tubing’s nominal ID and OD before ordering.
- ✓G1/4 female ports on custom-loop components
- ✓BA-STKA-13 for soft tubing with a nominal ID × OD of 10 × 13 mm
- ✓BA-STKA-16 for soft tubing with a nominal ID × OD of 10 × 16 mm
Design Highlights
Straight compression fittings
The threaded collar tightens over the tube after it is seated on the fitting barb. Match the collar to the tube’s outer diameter so it grips the tubing wall.
Make turns and close unused ports
Thread a straight compression fitting into the female side of a 90° adapter to turn the tube run at the port. Fit a stop plug to any unused G1/4 port you need to close.
Key Specifications
| Model | Barrow BA-STKA |
|---|
| Tubing type | Soft tubing |
|---|
| Nominal tubing size (ID × OD) | 10 × 13 mm or 10 × 16 mm |
|---|
| Component port thread | G1/4 |
|---|
| Elbow connection | 90° G1/4 male to G1/4 female |
|---|
| Fitting finishes | Black, White, Silver, Gold |
|---|
Which Version Do I Need?
Choose by what you need to connect and what you already have.
Barrow BA-STKA Fitting KitTHIS PAGE
Choose this kit if you need soft tubing, straight compression fittings, 90° adapters, and stop plugs for the same build.
Choose the 4- or 8-piece pack if you already have tubing and only need straight fittings. Match the fittings to your tubing size.
What's in the Box
8 × G1/4 straight soft tube compression fittings2 × G1/4 male-to-female 90° adapters2 × G1/4 stop plugs3 m total of soft tubing
Fittings shown in silver.
Installation & Use
1Plan the tube runs and cut the soft tubing square. Leave enough length to avoid kinking at bends.
2Fit the compression fittings to your G1/4 ports. Where a run needs to turn at a port, install a 90° adapter first and thread the compression fitting into it. Plug any unused ports.
3Unscrew the compression collar and slide it over the tube with the threads facing the fitting. Push the tube fully onto the barb, then thread the collar back onto the fitting and tighten it.
4Follow your loop components’ instructions to fill and leak-test the loop before powering the PC.
To complete the loop, supply the water block, radiator, pump, reservoir, and coolant.
FAQ
Can I use the same fitting for 10 × 13 and 10 × 16 mm soft tubing?
Choose the fitting that matches your tubing’s nominal ID × OD: 10 × 13 mm or 10 × 16 mm.
Can I use these fittings with 16 mm hard tubing?
The 10 × 16 mm fittings are designed to clamp flexible tubing over a barb. Use hard-tube fittings for rigid tubing.
How many fittings come with the kit?
The kit includes eight straight compression fittings, two 90° adapters, and two stop plugs.
What thread do the elbows use?
Each elbow has one G1/4 male thread for a component port and one G1/4 female thread for a fitting.
Can I order the fittings in gold?
Gold is available in both tube sizes, along with black, white, and silver.
Notes- The color between different kind of Fitting might have difference. (For example, the gold color for tube fitting might be different with the gold color of 90 degree fitting.)
- Due to the difference between different monitors, the color of pictures and the real object will be slightly different.
- In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.