Description
The Barrow LLO11Q-SDB V1 mounts at the front of the original Lian Li PC-O11 Dynamic. Its acrylic channels give the tubing from your CPU block, GPU block, and radiators a common connection point at the front of the case. The layout uses a Barrow Intel-platform CPU water block and one graphics card, with a separate pump.
Barrow specifies the original Lian Li PC-O11 Dynamic chassis.
The O11 Dynamic EVO, O11 Vision Compact, and O11 Dynamic XL are outside Barrow’s listed fit scope.
The layout is for a Barrow Intel-platform CPU water block and one GPU water block. Check your case model before ordering.
A frosted acrylic face and a clear acrylic back enclose the V1 coolant channels.
Connect the plate with G1/4 fittings sized for your tubing. Barrow’s V1 build lists 14 mm OD rigid tubing and matching compression fittings.
| Model | LLO11Q-SDB V1 |
|---|---|
| Mount | Front of the case |
| Front and back | Frosted acrylic front, clear acrylic back |
| Coolant port thread | G1/4 |
| Lighting | Barrow LRC 2.0 Aurora, 5V 3-pin ARGB |
| Recommended pump | Barrow SPB17-S V2, sold separately |
| Radiators in Barrow’s example | Two 240 mm radiators, top and bottom |
Check your case model and pick the position where you want to route your tubing.
Choose No Controller if you already have a compatible LRC 2.0 controller. The pump and other loop components are separate.
You also need a pump, CPU and GPU water blocks, radiators, G1/4 fittings, tubing, and coolant.
Barrow specifies the original PC-O11 Dynamic. Lian Li lists the original case models as O11DX and O11DW.
The pump is sold separately. Barrow lists the SPB17-S V2 in its V1 build.
Barrow’s V1 example uses two 240 mm radiators, one at the top and one at the bottom.
Yes. Both options include an adapter cable for a 5V 3-pin ARGB motherboard header.
Both options use the same V1 plate and ARGB strip. Choose With Manual Controller to add a manual lighting controller.