Barrow · BS-COIA5090-PA
Full-cover water block for Colorful iGame RTX 5090 D
The Barrow BS-COIA5090-PA replaces the factory cooler on select Colorful iGame RTX 5090 D 32GB cards. Its copper cold plate carries heat from the GPU core, memory, and power delivery components into a custom liquid cooling loop. An aluminum alloy backplate mounts behind the graphics card PCB.
Fits
Select iGame RTX 5090 D 32GB cards
Compatibility
Barrow lists these eight Colorful iGame RTX 5090 D 32GB models.
- ✓Colorful iGame RTX 5090 D Advanced OC 32GB
- ✓Colorful iGame RTX 5090 D Advanced 32GB
- ✓Colorful iGame RTX 5090 D Neptune OC 32GB
- ✓Colorful iGame RTX 5090 D Neptune 32GB
- ✓Colorful iGame RTX 5090 D Vulcan W OC 32GB
- ✓Colorful iGame RTX 5090 D Vulcan W 32GB
- ✓Colorful iGame RTX 5090 D Vulcan OC 32GB
- ✓Colorful iGame RTX 5090 D Vulcan 32GB
Barrow lists the ASUS ROG Astral LC RTX 5090 D O32G Gaming and ROG Astral RTX 5090 D O32G Gaming under a separate water block model.
Before ordering, check your card’s full model name and confirm its PCB layout matches Barrow’s listing.
Key Specifications
| Model | BS-COIA5090-PA |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Aluminum alloy |
|---|
| Backplate colors | Black or white |
|---|
| Water block (L × W × H) | 232.90 × 150.90 × 24 mm |
|---|
| Inlet and outlet threads | G1/4 |
|---|
| Lighting | 5V 3-pin ARGB (RBW) |
|---|
What's in the Box
1 × Full-cover GPU water block1 × Aluminum alloy backplate2 × G1/4 stop plugs1 × Mounting hardware set1 × Thermal pad set
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Remove the factory cooler and clean the GPU die.
2Cut and place the thermal pads by thickness as shown in Barrow’s BS-COIA5090-PA installation diagram. Apply your own thermal paste to the GPU die.
3Mount the block and backplate using the hardware positions in Barrow’s diagram.
4Connect the G1/4 tubing fittings at the inlet and outlet, seal unused ports with the stop plugs, and leak-test the loop before powering the graphics card.
Have a custom liquid cooling loop and G1/4 tubing fittings ready.
FAQ
Will this fit an iGame RTX 5090 D Neptune 32GB?
Yes. Barrow lists both the 32GB Neptune and Neptune OC. Confirm your card’s exact model and PCB layout before ordering.
Can I sync the lighting with my motherboard?
Use a separately sold adapter cable to connect the lighting to a 5V 3-pin ARGB motherboard header. A 12V 4-pin RGB header can damage the lighting.
Do I need separate tubing fittings?
Yes. The box includes two G1/4 stop plugs. Supply your own G1/4 tubing fittings for the inlet and outlet.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.