Description
The Barrow TDSHH-V2 is a brass anti-cyclone fitting for a custom PC water cooling reservoir. Its G1/4 male thread screws into a matching port on the inside of the reservoir. Side slots spread the incoming coolant sideways to soften the impact of the stream as it enters the tank.
Use this fitting inside the reservoir.
Check the reservoir’s drawing for room around the port and enough depth for the threaded section.
Coolant enters through the threaded end and spreads through the long slots into the reservoir.
The body is 12.6 mm across and 14 mm high, with a separate 5 mm threaded section. Use the drawing below to check the space around your reservoir port.
| Model | TDSHH-V2 |
|---|---|
| Body material | Brass |
| Thread | G1/4 male |
| Body diameter | 12.6 mm |
| Body height | 14 mm, excluding thread |
| Thread length | 5 mm |
| Colors | White, black, shiny silver |
Both fittings mount inside a water cooling reservoir. Compare the body diameter with the space around your port.
You’ll need a reservoir with an accessible internal G1/4 female port.
It screws into a G1/4 female port from inside the reservoir. Check that there’s room for the body around that port.
They spread the incoming coolant sideways to soften the stream entering the reservoir.
The body is 14 mm tall, and the G1/4 threaded section adds 5 mm.
Yes. Choose white, black, or shiny silver. Each order unit contains one fitting in the selected color.