Barrow · BS-GAD5090-PA
Full-cover water block for select Gainward and GALAX RTX 5090 D cards
The Barrow BS-GAD5090-PA replaces the stock cooler on select Gainward and GALAX GeForce RTX 5090 D graphics cards. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to your custom cooling loop. The block uses G1/4 ports and comes with an aluminum alloy backplate.
Fits
Select Gainward and GALAX RTX 5090 D PCBs
Compatibility
Barrow’s product guide lists these graphics cards.
- ✓Gainward GeForce RTX 5090 D Ta Xue OC
- ✓Gainward GeForce RTX 5090 D Ta Xue
- ✓Gainward GeForce RTX 5090 D Zhui Feng OC
- ✓Gainward GeForce RTX 5090 D Zhui Feng
- ✓GALAX GeForce RTX 5090 D General
Before ordering, verify your exact card model and check that its PCB layout matches Barrow’s compatibility information.
Gainward GeForce RTX 5090 D Ta Xue OC shown in Barrow’s compatibility guide.
Key Specifications
| Model | BS-GAD5090-PA |
|---|
| Coverage | GPU core, memory, and power delivery components |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Aluminum alloy, black or white |
|---|
| Inlet and outlet thread | G1/4 |
|---|
| Lighting | 5V 3-pin ARGB |
|---|
| Block dimensions (L × W × thickness shown) | 214.60 × 146.51 × 24.20 mm |
|---|
What's in the Box
1 × full-cover GPU water block1 × aluminum alloy backplate2 × G1/4 stop plugsMounting hardwareThermal pads
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Power off the system, remove the graphics card, and take off its stock cooler.
2Follow Barrow’s pad placement diagram and apply your own thermal paste to the GPU die.
3Fit the block and backplate using the supplied mounting hardware and Barrow’s screw placement diagram.
4Connect the tubing to the designated inlet and outlet with G1/4 fittings, then cap the unused ports.
5Leak-test the loop before powering the graphics card.
For the custom loop, you also need G1/4 tubing fittings, tubing, a pump, a radiator, and coolant.
FAQ
How do I check if my RTX 5090 D fits?
Match the full card name in the compatibility list, including the OC suffix if present, and verify the PCB layout before ordering.
How do I connect the lighting to my motherboard?
Use a separately purchased ARGB adapter cable with a 5V 3-pin ARGB header. Do not connect it to a 12V 4-pin RGB header.
Are the tubing fittings included?
The box includes two G1/4 stop plugs. Supply your own G1/4 fittings for the tubing.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.