Barrow · BS-AST4090-PA
Full-cover water block for ASUS TUF and ROG Strix RTX 4090
The Barrow BS-AST4090-PA replaces the stock cooler on supported ASUS TUF and ROG Strix GeForce RTX 4090 cards. It connects to a custom liquid cooling loop through G1/4 ports and cools the GPU core, memory, and power delivery components. An aluminum backplate mounts behind the graphics card PCB.
Fits
Select ASUS TUF / ROG Strix RTX 4090
Compatibility
Barrow lists these four ASUS card models.
- ✓ASUS TUF-RTX4090-O24G-GAMING
- ✓ASUS TUF-RTX4090-24G-GAMING
- ✓ASUS ROG-STRIX-RTX4090-O24G-GAMING
- ✓ASUS ROG-STRIX-RTX4090-24G-GAMING
Before ordering, check the full model code on your card and verify its PCB layout with Barrow.
ASUS ROG-STRIX-RTX4090-O24G-GAMING with its stock cooler.
Key Specifications
| Model | BS-AST4090-PA |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Aluminum alloy, black or white |
|---|
| Dimensions (L × W × max. T) | 217.2 × 156.8 × 23.9 mm |
|---|
| Port thread | G1/4 inlet and outlet |
|---|
| Lighting | Barrow LRC 2.0 ARGB |
|---|
| Motherboard sync | 5 V 3-pin ARGB via the sync cable |
|---|
What's in the Box
1 × full-cover GPU water block1 × backplate in the selected color2 × G1/4 stop plugsMounting hardwareThermal padsSync cable or manual controller, as selected
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Remove the stock cooler and clean off the old thermal paste and pad residue.
2Place the thermal pads according to Barrow’s guide for your PCB and apply your own thermal paste to the GPU die.
3Align the block and backplate with the PCB. Secure them with the mounting hardware shown in Barrow’s guide.
4Connect the inlet and outlet to your loop with G1/4 fittings and close the unused ports with the stop plugs.
5Leak-test the loop before powering the graphics card.
Have a custom liquid cooling loop, tubing, and G1/4 loop fittings ready.
FAQ
How do I check whether my TUF or Strix RTX 4090 fits?
Match the full model code to Barrow’s compatibility list above and verify the PCB layout before ordering.
Which fittings do I need?
Use G1/4 fittings that match your loop tubing. Two G1/4 stop plugs are included.
Which motherboard header can I use to sync the lighting?
Use the sync cable with a 5 V 3-pin ARGB header. Keep it off 12 V 4-pin RGB headers.
Notes- 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.