Barrow · BS-AST4090OG-PA
Full-cover water block for the ASUS TUF RTX 4090 OG OC
The Barrow BS-AST4090OG-PA replaces the factory cooler on the ASUS TUF RTX 4090 OG OC with the A02 PCB. Its cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant in a custom loop. A separate black aluminum backplate mounts behind the card.
Fits
ASUS TUF RTX 4090 OG OC · A02 PCB
Compatibility
Barrow confirms this card and PCB revision.
- ✓ASUS TUF Gaming GeForce RTX 4090 OG OC Edition (TUF-RTX4090-O24G-OG-GAMING) · A02 PCB
Before ordering, confirm the full ASUS model number and A02 revision. Compare your board layout with the PCB photo in the product gallery.
ASUS product photo of the OG OC card with its factory cooler. Verify the PCB revision separately.
Design Highlights
Microchannels over the GPU core
Barrow machines the cold plate from 10 mm copper stock. Coolant flows through microchannels over the GPU core.
Black aluminum backplate
The included aluminum-alloy backplate covers the rear of the PCB. The block and backplate mount on opposite sides of the card.
Clear acrylic with addressable lighting
The clear top shows the coolant path and the Barrow LRC 2.0 lighting. Use a compatible 5V controller or a sync adapter for a 5V 3-pin ARGB motherboard header.
Key Specifications
| Model | BS-AST4090OG-PA |
|---|
| Cooling coverage | GPU core, memory, and power delivery |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Black aluminum alloy |
|---|
| Water block (L × W × max. T) | 263.30 × 151.90 × 23.90 mm |
|---|
| Inlet and outlet thread | G1/4 |
|---|
| Lighting | Barrow LRC 2.0 · 5V 3-pin ARGB |
|---|
Barrow’s water-block drawing. Measurements are in millimeters.
Which Version Do I Need?
Match the block to the exact model number and PCB revision of your graphics card.
Barrow BS-AST4090OG-PATHIS PAGE
Choose this block for the ASUS TUF RTX 4090 OG OC with the A02 PCB.
Barrow lists this block for these four ASUS models.
TUF-RTX4090-O24G-GAMING
TUF-RTX4090-24G-GAMING
ROG-STRIX-RTX4090-O24G-GAMING
ROG-STRIX-RTX4090-24G-GAMING
What's in the Box
1 × full-cover GPU water block1 × black aluminum backplate2 × G1/4 stop plugs1 × mounting hardware setThermal pad set
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Shut down and disconnect power. Remove the graphics card and take off its factory cooler.
2Clean off old thermal material. Cut the supplied pads to match the placement diagram and apply your own thermal paste to the GPU die.
3Align the block, PCB, and backplate. Match the mounting hardware to the screw locations and secure the assembly.
4Check the inlet and outlet positions before connecting the tubing with G1/4 fittings. Seal unused ports with the supplied stop plugs.
5Leak-test your loop before powering the graphics card.
A typical new loop uses a pump, reservoir, radiator, tubing, and coolant. Choose G1/4 fittings that match your tubing.
Use Barrow’s pad map to cut the pads to shape and place them in the marked areas ①, ②, and ③.
FAQ
Which Barrow block fits a standard TUF RTX 4090?
Barrow lists BS-AST4090-PA for TUF-RTX4090-O24G-GAMING and TUF-RTX4090-24G-GAMING.
Does it come with a backplate?
Yes. The block comes with a separate black aluminum-alloy backplate and mounting hardware.
How do I connect the ARGB lighting?
Select the lighting sync cable add-on for a 5V 3-pin ARGB motherboard header, or select the controller add-on for separate control. Never connect the lighting to a 12V 4-pin RGB header.
Do I need to buy tubing fittings separately?
Yes. Choose G1/4 fittings that match your tubing. The two included stop plugs seal the unused ports.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.