Description
The Barrow BS-DAK9070XT-PA is a full-cover water block for the PowerColor Hellhound Radeon RX 9070 XT 16GB cards listed below. It replaces the stock cooler and transfers heat from the GPU core, memory, and voltage regulators into a custom liquid cooling loop. The included aluminum backplate mounts behind the PCB.
Barrow lists these two PowerColor Hellhound models.
Before ordering, verify your exact graphics card model and PCB layout. Contact FormulaMod if you need help confirming the fit.
The machined copper cold plate spans the GPU, memory, and voltage regulators. Coolant flows through microchannels above the GPU contact area.
The clear top leaves the coolant path visible. Use G1/4 fittings sized for your tubing to connect the block to the loop.
Both backplate options have 5V ARGB lighting. To sync the lighting with your motherboard, use a compatible adapter cable and a 5V three-pin ARGB header.
| Model | BS-DAK9070XT-PA |
|---|---|
| Cooling coverage | GPU core, memory, and voltage regulators |
| Cold plate | CNC-machined copper |
| Top | Clear acrylic |
| Backplate | Aluminum alloy, black or white |
| Water block size (L × W × max. thickness) | 194.60 × 123.20 × 24 mm |
| Port thread | G1/4 |
| Lighting | 5V ARGB |
| Motherboard lighting header | 5V three-pin ARGB via an adapter cable |
Start with your graphics card maker and exact model, then check the PCB layout for that block.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
You also need a pump, radiator, coolant, tubing, and G1/4 fittings that match your tubing.
Barrow lists two PowerColor Hellhound models in the compatibility section above. Check your exact model number and PCB layout before ordering.
Yes. One aluminum backplate comes with the block. Select black or white when ordering.
Use G1/4 fittings matched to your tubing. The two included stop plugs close unused ports, and the tubing fittings are separate.
Use a 5V three-pin ARGB header with a compatible adapter cable.