Barrow · BS-GAM4090-PA
Full-cover GPU water block for GALAX RTX 4090 MetalTop
The Barrow BS-GAM4090-PA replaces the stock cooler on supported cards such as the GALAX GeForce RTX 4090 MetalTop OC. Its copper cold plate cools the GPU core, memory, and voltage regulation components. The block connects to a custom liquid cooling loop through G1/4 ports and comes with a black aluminum backplate.
Fits
GALAX RTX 4090 MetalTop and MetalTop OC
Compatibility
Barrow lists these graphics card models for this block.
- ✓GALAX GeForce RTX 4090 MetalTop OC
- ✓GALAX GeForce RTX 4090 MetalTop
- ✓Gainward GeForce RTX 4090 Xuanguang OC (炫光 OC)
- ✓Gainward GeForce RTX 4090 Xuanguang (炫光)
Before ordering, verify the exact card model and check its PCB layout against Barrow’s compatibility information.
GALAX GeForce RTX 4090 MetalTop OC with its stock cooler.
Key Specifications
| Manufacturer model | BS-GAM4090-PA |
|---|
| Configuration SKU | BS-GAM4090-PA-BK |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Black aluminum alloy |
|---|
| Coverage | GPU core, memory, and VRM |
|---|
| Inlet and outlet thread | G1/4 |
|---|
| Block dimensions (L × W × max. thickness) | 198.20 × 146.60 × 23.90 mm |
|---|
| Lighting | Barrow LRC 2.0 5V ARGB |
|---|
What's in the Box
1 × full-cover GPU water block1 × black aluminum backplate1 × dual-slot I/O bracket2 × G1/4 stop plugsMounting hardwareThermal pads
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Remove the graphics card’s stock cooler and clean the old thermal material from the GPU.
2Place the thermal pads at the contact points shown in Barrow’s installation diagram and apply your own thermal paste to the GPU die.
3Check the adjustable standoff position for your card against Barrow’s diagram, then secure the block and backplate with the mounting hardware.
4Connect the inlet and outlet using G1/4 fittings and cap the unused ports with the stop plugs.
5Leak-test the loop before powering the graphics card.
For the loop, also have a pump, reservoir, radiator, tubing, G1/4 tubing fittings, and coolant.
FAQ
Does it fit the GALAX RTX 4090 MetalTop without the OC suffix?
Yes. Barrow lists the MetalTop and MetalTop OC separately. Check your card’s PCB before ordering.
Can I connect the lighting to my motherboard?
Use a separately sold Barrow ARGB adapter cable with a 5V 3-pin ARGB header. Do not connect it to a 12V 4-pin RGB header.
Are the tubing fittings included?
The kit includes two G1/4 stop plugs. Supply your own G1/4 tubing fittings.
Notes- 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.