RTX 4080 / 4080 SUPER Founders Edition Water Block with Backplate | Barrow BS-NVG4080-PA

Barrow · BS-NVG4080-PA

Full-cover water block for RTX 4080 Founders Edition cards

The Barrow BS-NVG4080-PA replaces the stock cooler on a compatible NVIDIA GeForce RTX 4080 Founders Edition card. Its copper cold plate cools the GPU core, memory, and power delivery components. The block connects to a custom liquid cooling loop through G1/4 ports and comes with an aluminum backplate.

Fits
RTX 4080 / 4080 SUPER FE
Cold plate
Copper
Port thread
G1/4
Lighting
5V addressable RGB

Compatibility

For these NVIDIA Founders Edition cards

  • ✓NVIDIA GeForce RTX 4080 Founders Edition
  • ✓NVIDIA GeForce RTX 4080 SUPER Founders Edition

Barrow lists the following cards with different water blocks.
NVIDIA GeForce RTX 4090 Founders Edition
ASUS ROG Strix RTX 4080 O16G Gaming
Gigabyte GeForce RTX 4080 16GB Gaming OC
MSI GeForce RTX 4080 16GB SUPRIM X

Before ordering, confirm your exact card model and check its PCB layout. The product gallery includes an RTX 4080 Founders Edition PCB photo.

NVIDIA GeForce RTX 4080 SUPER Founders Edition with the stock cooler.

Design Highlights

Barrow’s assembly drawing shows ① the water block, ⑤ the graphics card PCB, and ⑧ the backplate.

One cold plate for three heat sources

The cold plate draws heat from the GPU core, memory, and voltage regulation components. Coolant carries that heat to the radiator in your loop.

The red fittings are for display. Use your own G1/4 tubing fittings.

Jet microchannels over the GPU core

Barrow describes up to 43 jet microchannels in the copper cold plate, with a 0.5 mm groove width and 0.3 mm spacing.

Addressable lighting under a clear top

The transparent acrylic top shows the LRC 2.0 lighting. Choose the optional sync cable to use a motherboard’s 5V 3-pin ARGB header, or choose the optional light controller.

Key Specifications

ModelBS-NVG4080-PA
SeriesAurora LRC 2.0
Cold plateCopper
TopClear acrylic
BackplatePassive aluminum alloy, black or white
PortsG1/4 inlet and outlet
I/O bracketDual-slot design
Block (L × W × max. T)200.80 × 146.20 × 25.90 mm
Lighting5V 3-pin ARGB motherboard connection via optional sync cable

Barrow’s block dimensions in millimeters.

Which Version Do I Need?

Start with the exact graphics card model and PCB layout.

Barrow BS-NVG4080-PATHIS PAGE
For the RTX 4080 Founders Edition and RTX 4080 SUPER Founders Edition.
Choose this model for the NVIDIA RTX 4090 Founders Edition.
Choose this model for the ASUS ROG Strix RTX 4080 O16G Gaming.
Choose this model for the Gigabyte RTX 4080 16GB Gaming OC.
Choose this model for the MSI RTX 4080 16GB SUPRIM X.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate in the selected color2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set

The light controller and motherboard sync cable are separate checkout options.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Shut down the PC, disconnect power, and remove the graphics card. Take off the stock cooler and clean the old thermal materials from the contact surfaces.
2
Cut the thermal pads to match Barrow’s diagram and place them on the matching contact areas. Apply your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate. Follow Barrow’s assembly and screw diagrams for hardware placement, then secure the block and backplate.
4
Connect the loop with G1/4 fittings, follow the inlet and outlet markings, and seal the unused ports with the supplied stop plugs.
5
Fill the loop and check for leaks with the graphics card unpowered. Power the card once the loop passes the leak test.

Bring a pump and reservoir, radiator and fans, tubing, matching G1/4 fittings, and coolant.

Legend for Barrow’s pad placement diagram. ① Blue is 1.2 mm, ② black is 0.5 mm, and ③ light gray is 1.0 mm.

FAQ

Will this fit my RTX 4080 SUPER Founders Edition?

Yes. Check that your card is the NVIDIA Founders Edition and verify its PCB layout before ordering.

Which thermal pads come with the block?

One thermal pad set is included. Cut and place the pads as shown in Barrow’s diagram.

How do I connect the RGB lighting?

Use the optional sync cable with a 5V 3-pin motherboard ARGB header, or choose the optional light controller. A 12V 4-pin RGB header can damage the LEDs.

Which fittings do I need?

Use G1/4 fittings that match your tubing. The kit includes stop plugs for unused ports, and you supply the tubing fittings.

Notes
  • For return eligibility, condition requirements and available remedies, see FormulaMod’s Returns & RMA policy. Items generally must be unused and in their original packaging with all included parts. The policy makes an exception for defects that prevent normal use.
  • For warranty assistance, contact FormulaMod customer service.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.
  • Barrow describes the copper cold plate as CNC-machined.