Barrow · BS-NVG4090-PA
Full-cover water block for the RTX 4090 Founders Edition
The Barrow BS-NVG4090-PA replaces the stock air cooler on the NVIDIA GeForce RTX 4090 Founders Edition for use in a custom liquid cooling loop. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant. An aluminum backplate mounts behind the PCB.
Fits
RTX 4090 Founders Edition
Motherboard sync
5V 3-pin ARGB
Compatibility
Match your card to Barrow’s listed PCB.
- ✓NVIDIA GeForce RTX 4090 Founders Edition (NVIDIA factory PCB)
Before ordering, confirm the exact card model and compare the full PCB layout with the photo.
Barrow’s photo of the NVIDIA RTX 4090 Founders Edition PCB.
Design Highlights
Full-cover cold plate
The clear acrylic top lets you see the coolant path and the jet microchannels over the GPU core. Barrow lists 43 microchannels in the cold plate.
Aluminum backplate
The included backplate fastens behind the PCB. Choose a black or white backplate when ordering.
LRC 2.0 addressable lighting
Select the optional lighting sync cable to use a motherboard’s 5V 3-pin ARGB header. A light controller is also available as an add-on.
Key Specifications
| Model | BS-NVG4090-PA |
|---|
| Series | Aurora LRC 2.0 |
|---|
| Cold plate | Copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Aluminum alloy |
|---|
| Backplate colors | Black or white |
|---|
| Coverage | GPU core, memory, and power delivery components |
|---|
| Port thread | G1/4 |
|---|
| Block length × width | 198 × 146 mm |
|---|
| Side-view dimensions | 24 mm and 23 mm in Barrow’s drawing |
|---|
| Lighting | LRC 2.0 ARGB |
|---|
| Motherboard sync | 5V 3-pin ARGB via optional sync cable |
|---|
Which Version Do I Need?
Use the exact card model and PCB revision to choose a block.
Barrow BS-NVG4090-PATHIS PAGE
Choose this model for the RTX 4090 Founders Edition PCB shown above.
For the NVIDIA GeForce RTX 4080 Founders Edition PCB.
For ASUS ROG Strix RTX 4090 O24G Gaming and 24G Gaming, and TUF-RTX4090-O24G-GAMING and TUF-RTX4090-24G-GAMING, as listed in Barrow’s compatibility table. The linked listing shows the TUF-RTX4090-O24G-GAMING PCB.
For the ASUS TUF RTX 4090 O24G OG Gaming with the A02 PCB.
For Gigabyte AORUS RTX 4090 Master 24G and Gigabyte RTX 4090 Gaming OC 24G.
Check this listing if you have an MSI RTX 4090 Suprim X 24G or RTX 4090 Gaming X Trio 24G.
What's in the Box
1 × full-cover GPU water block1 × aluminum backplate2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set
The light controller or lighting sync cable is supplied when you select the corresponding add-on.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Power off the PC, remove the graphics card, and take off the stock cooler. Clean the old thermal material off the card.
2Cut the thermal pads to match Barrow’s numbered diagram and place them where it shows. Apply your own thermal paste to the GPU die.
3Align the block, PCB, and backplate. Follow Barrow’s assembly and screw diagrams for spacer placement and screw positions.
4Check the inlet and outlet positions before connecting your tubing with G1/4 fittings. Seal the unused ports with the supplied stop plugs.
5Leak-test the loop before powering the graphics card.
You also need a pump, radiator, tubing, G1/4 tubing fittings, and coolant.
Barrow’s numbered thermal pad placement diagram for the BS-NVG4090-PA.
FAQ
Does this water block fit every RTX 4090?
Barrow lists it for the NVIDIA GeForce RTX 4090 Founders Edition PCB shown here. If you have a partner card, use Barrow’s listing for your exact model and PCB revision.
Does this come with an RTX 4090 already installed?
The package contains the water block, backplate, stop plugs, and installation parts. Use your own matching graphics card.
Which motherboard lighting header do I use?
Use the optional sync cable with a 5V 3-pin ARGB header and match the connector orientation. Connecting the sync cable to a 12V 4-pin RGB header can damage the LEDs.
Are the tubing fittings included?
The package includes two stop plugs for unused ports. Supply your own G1/4 tubing fittings sized for your tubing.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- Warranty
12 months from date of purchase.