Sapphire NITRO+ RX 9070 XT OC 16GB Water Block with Backplate, Barrow BS-SA9070XT-PA

Barrow · BS-SA9070XT-PA

Full-cover GPU water block for the Sapphire NITRO+ RX 9070 XT

The Barrow BS-SA9070XT-PA replaces the stock air cooler on the Sapphire NITRO+ Radeon RX 9070 XT OC 16GB with a full-cover block for a custom liquid cooling loop. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant. An aluminum backplate mounts behind the PCB.

Fits
Sapphire NITRO+ RX 9070 XT OC
Port thread
G1/4
Lighting
5V 3-pin ARGB
Backplate
Black or white aluminum

Compatibility

Barrow confirms this graphics card PCB.

  • ✓Sapphire NITRO+ AMD Radeon RX 9070 XT OC 16GB (11348-01-20G)

Before ordering, verify your exact card model and compare your PCB layout with the bare-board photo in the product gallery.

Sapphire NITRO+ RX 9070 XT OC with its factory cooler.

Design Highlights

Clear acrylic top and G1/4 ports

The clear acrylic top leaves the coolant path visible. The terminal uses G1/4 inlet and outlet threads so you can choose fittings sized for your tubing.

Copper cold plate

Barrow specifies a CNC-machined, nickel-plated copper cold plate for this model. The core area uses up to 43 jet microchannels.

Built-in addressable lighting

The lighting is 5V 3-pin ARGB. To sync it with a motherboard, use the separately sold Barrow ARGB adapter cable on a 5V 3-pin header.

Key Specifications

ModelBS-SA9070XT-PA
Cold plateCopper
TopClear acrylic
BackplateAluminum alloy
Backplate optionsBlack (BS-SA9070XT-PA-BK) or white (BS-SA9070XT-PA-WT)
Cooling coverageGPU core, video memory, and power delivery components
Inlet and outlet threadG1/4
Water block (L × W × max. T)217 × 133.20 × 24 mm
Lighting5V 3-pin ARGB (RBW)

Barrow’s dimension drawing. The side view marks 24 mm at the tallest point and 23 mm at the adjacent surface.

Which Version Do I Need?

Check the Sapphire model name on your card before choosing a block.

Barrow BS-SA9070XT-PATHIS PAGE
Choose this block for the listed Sapphire NITRO+ RX 9070 XT OC PCB.
Check this model if you have the Sapphire METAL RX 9070 XT 16GB D6.

What's in the Box

1 × full-cover GPU water block1 × aluminum alloy backplate in your selected color2 × G1/4 stop plugs1 × mounting hardware set (screws and washers)Thermal pad set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

White backplate above, black backplate below.

Installation & Use

1
Shut down and unplug the PC. Remove the graphics card, take off its stock cooler, and clean away the old thermal materials.
2
Cut and place the thermal pads as shown in the diagram. Apply your own thermal paste to the GPU core.
3
Align the water block, PCB, and backplate. Secure them with the supplied mounting hardware.
4
Check the inlet and outlet positions, connect the tubing with G1/4 fittings, and seal unused ports with the stop plugs.
5
Fill and leak-test the loop with only the pump powered before powering the graphics card.

For the loop, you also need a pump, reservoir, radiator and fans, tubing with matching G1/4 fittings, and coolant.

Barrow’s pad map. 1 = 1.2 mm, 2 = 0.5 mm, 3 = 1.0 mm.

FAQ

Which Sapphire RX 9070 XT PCB does this block fit?

Barrow lists the NITRO+ RX 9070 XT OC 16GB PCB. Sapphire sells the PULSE as a separate model, so check the exact model name and PCB before ordering.

What are the water block dimensions?

Barrow’s drawing shows a length of 217 mm, a width of 133.20 mm including the port terminal, and a maximum thickness of 24 mm.

Does it come with a backplate?

Yes. The water block comes with one aluminum alloy backplate. Choose black or white when ordering.

Which fittings do I need?

Use G1/4 loop fittings sized for your tubing. Two G1/4 stop plugs are included. Buy the tubing fittings separately.

How do I connect the RGB lighting to my motherboard?

Use a separately sold Barrow ARGB adapter cable and connect it to a 5V 3-pin ARGB header. Do not connect it to a 12V 4-pin RGB header.

Notes
  • 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.