Description
Barrowch Wolverine FBYKNF fittings connect 14 or 16 mm OD hard tubing to G1/4 ports in a custom PC water-cooling loop. A push-in clamp grips each tube to resist pullout, and an internal O-ring seals around it. Each set contains eight fittings in the size and finish you select.
Match the fitting to the outside diameter of your tubing.
The threaded end connects to a female G1/4 port on a water block, radiator, or reservoir.
The internal clamp grips the tube as you push it into the fitting. An O-ring seals around the inserted tube.
The raised checkerboard texture gives your fingers a grip as you thread the fitting into a port.
| Models | FBYKNF-14 and FBYKNF-16 |
|---|---|
| Fitting type | Straight push-in hard tube fitting |
| Component thread | G1/4 male |
| Thread length | 5 mm |
| Body material | H59 brass |
| Surface treatment | Electroplated finish |
| Body diameter (FBYKNF-16) | 24 mm |
| Available finishes | Black or silver |
All eight fittings come in the selected tube size and finish. Hard tubing and other loop components are sold separately.
Have matching hard tubing, cutting and deburring tools suited to your tubing, and your loop components ready.
Measure the outside diameter of your hard tube. Order FBYKNF-14 for 14 mm OD or FBYKNF-16 for 16 mm OD.
Push the tube in until it reaches the stop. An internal clamp grips the tube, and an O-ring seals around it.
Switch off the PC and drain the loop first. Press the fitting’s release ring while you pull the tube out.
The set contains eight fittings in the same size and finish you select.