LGA 1700 Direct-Die CPU Water Block for Delidded Intel 12th/13th Gen – Barrow LTST-B

Barrow · LTST-B

LGA 1700 direct-die CPU water block

The Barrow LTST-B cools delidded 12th- and 13th-gen Intel Core desktop processors on LGA 1700 in a custom liquid cooling loop. With the integrated heat spreader removed, its copper cold plate transfers heat from the exposed die to the coolant. The block uses a direct-die mounting frame and has dedicated G1/4 inlet and outlet ports.

Fits
Delidded Intel Core 12th/13th Gen · LGA 1700
Cold plate
Copper
Ports
G1/4 inlet and outlet

Compatibility

Barrow lists these delidded LGA 1700 desktop processors.

  • ✓Intel Core 12th Gen desktop CPUs with the heat spreader removed
  • ✓Intel Core 13th Gen desktop CPUs with the heat spreader removed

Not compatible:

  • ✗CPUs with the factory heat spreader still installed

Key Specifications

ModelLTST-B
ColorSilver
CPU socketIntel LGA 1700
Cold plateCopper
Mounting frameAluminum alloy with insulating pad
Dimensions (L × W × T)72 × 61 × 17.85 mm
Port threadsG1/4 inlet and outlet
Port spacing26 mm center to center

What's in the Box

1 × LTST-B CPU water block with direct-die mounting frameMotherboard mounting backplate

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Have a professional delid the CPU and remove the original socket retention mechanism.
2
Apply your own thermal interface material to the exposed die.
3
Follow Barrow’s installation diagram to align the frame and block and secure them to the included motherboard backplate with four mounting screws.
4
Connect your loop to the ports marked IN and OUT using G1/4 fittings.

You’ll need a custom liquid cooling loop and G1/4 fittings. Barrow recommends an inline filter upstream of the block.

Barrow’s mounting diagram.

FAQ

Can I install this block with the CPU heat spreader still on?

The heat spreader must be removed so the cold plate can sit directly over the exposed die.

Can I swap the inlet and outlet?

Follow the markings on the block. Connect the incoming coolant line to IN and the return line to OUT.

Notes
  • It is recommended that CPU opening and installation be performed by professionals.We only provide a limited warranty for the product itself and cannot be responsible for third-party losses caused by improper product modification, deployment, or operation;
  • Compatibility list: 12th and 13th generation Core CPUs after opening the lid;
  • It is recommended to install a filter device before the water block to prevent the water block from being blocked;
  • Pay attention to the position of the water inlet and outlet of the water block during installation, and installation errors will affect the heat dissipation performance;
  • In case of product appearance and structure upgrade, no further notice will be given and the actual product shall prevail.
  • Delidding voids the Intel processor warranty.