67%OFF

LRC 2.0 5V ARGB Replacement LED Strip for PC Cases, Barrow LD2RT-50 / LD2RT-100

€3.61 €10.99 now piece
items available
View Details
Barrow · LD2RT-50 / LD2RT-100

LRC 2.0 replacement LED strip for PC cases

The Barrow LD2RT-50 and LD2RT-100 are flexible 5V addressable RGB LED strips for lighting the inside of a PC case. They connect to Barrow LRC 2.0 lighting controllers and let individual LEDs display different colors. The adhesive backing holds the strip in place, and marked cut lines let you shorten it to fit.

Fits
Barrow LRC 2.0 controllers
Lengths
50 cm or 100 cm
Plug
2510 3-pin, 5V DC

Compatibility

  • ✓Barrow LRC 2.0 lighting controllers, including the ARSKZQ manual controller.
  • ✓Supported 5V addressable motherboard lighting headers via a compatible Barrow adapter cable.

Not compatible:

  • ✗12V 4-pin motherboard RGB headers (12V/G/R/B).
  • ✗Barrow LRC 1.0 controllers.

For motherboard sync, check the header and pinout in your motherboard manual before choosing an adapter.

Key Specifications

LD2RT-5050 cm, 30 LEDs
LD2RT-100100 cm, 60 LEDs
Rated voltage5V DC
Strip connector2510 3-pin
LightingBarrow LRC 2.0 addressable RGB
MountingFlexible strip with adhesive backing

LD2RT-100 shown.

What's in the Box

1 × LED strip in the selected length

The strip options ship without a controller. The product selector lists two controller options, including the manual controller.

Installation & Use

1
Measure where the strip will sit. If you need to shorten it, cut at a marked cut line.
2
Peel off the backing liner and press the strip into place inside the case.
3
Connect the 2510 plug to a compatible LRC 2.0 controller, or use a compatible Barrow adapter cable for motherboard sync.

FAQ

Can I use this as a replacement LED strip?

Check that your existing lighting controller is Barrow LRC 2.0 and that its strip connection matches the 5V 2510 3-pin plug.

Which length has 60 LEDs?

The 100 cm LD2RT-100 has 60 LEDs. The 50 cm LD2RT-50 has 30 LEDs.

Can I connect it directly to my motherboard?

For motherboard sync, Barrow specifies an adapter cable for supported 5V addressable lighting headers. Check your board’s header and pinout before ordering.

Notes
  • Cutting between the marked cut lines can leave part of the strip dark.