Lian Li O11 Dynamic Waterway Board, Barrow LLO11-SDB V1 Side Mount, 5V ARGB

Barrow · LLO11-SDB V1

Side-mount distro plate for the original O11 Dynamic

The Barrow LLO11-SDB V1 is a side-mounted distro plate for the original Lian Li PC-O11 Dynamic. Its acrylic channels give the tubing for an Intel CPU block, one GPU block, and the radiators a common connection point beside the motherboard. You supply the pump and the rest of the custom loop.

Fits
Lian Li PC-O11 Dynamic
Mount
Side, beside the motherboard
Port thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

For the original Lian Li PC-O11 Dynamic.

  • ✓Lian Li PC-O11 Dynamic Black (O11DX)
  • ✓Lian Li PC-O11 Dynamic White (O11DW)

Not compatible:

  • ✗Lian Li O11 Dynamic EVO
  • ✗Lian Li O11 Dynamic Mini
  • ✗Lian Li O11 Dynamic XL

Check the model number on your case before ordering. Barrow’s layout uses an Intel CPU water block and one GPU water block.

Barrow shows the LTYK3-04 V2, LTYKB-04N-V2, LTYKB-ARK, LTFHB-04N V2, and FBLTFHI-04N V2 as CPU block examples.

Original Lian Li PC-O11 Dynamic case shown for fit reference.

Design Highlights

Coolant channels built into the plate

The plate mounts beside the motherboard and gives the CPU block, GPU block, and radiators fixed points for tubing. Use G1/4 fittings sized for your tubing. Barrow’s example uses 14 mm OD hard tubing.

Barrow’s V1 build example shows the assembled loop with separately sourced hardware.

Replaceable 5V lighting strip

The included LRC 2.0 Aurora strip lights the edge of the plate. Choose the controller bundle to add a lighting controller, or use a compatible adapter cable to sync with a supported 5V ARGB motherboard header.

Key Specifications

Model (SKU)LLO11-SDB V1 (LLO11-SDBV1)
Mounting positionSide, beside the motherboard
Plate materialFrosted acrylic front and clear acrylic back
Port threadG1/4
LightingBarrow LRC 2.0 Aurora, 5V 3-pin ARGB
Radiator layout shown by Barrow360 mm radiators at the top and bottom
Barrow’s through-hole pump exampleSPB17-T PLUS, sold separately

Which Version Do I Need?

Match the plate to your case model and the position where you want to route the tubing.

LLO11-SDB V1THIS PAGE
Choose this plate for a side mount beside the motherboard in the original PC-O11 Dynamic.
Choose the front-mount plate if you want to route tubing to the front of the original PC-O11 Dynamic.
Choose this separate model if your case is an O11 Dynamic XL.

What's in the Box

1 × LLO11-SDB V1 distro plate1 × LRC 2.0 lighting strip1 set of mounting screws

With controller adds a lighting controller. The pump and the other loop components are sold separately.

Installation & Use

1
Loosely fasten the plate beside the motherboard using the included mounting screws.
2
Trial-fit the pump and tubing using the V1 routing diagram as a guide. Follow the inlet and outlet markings on your GPU block.
3
Once the tubing lines up, tighten the mounting screws and complete the loop with matching G1/4 fittings and stop plugs.
4
Connect the lighting to an LRC 2.0 controller or use a compatible adapter cable for a 5V ARGB motherboard header. Keep the strip off 12V 4-pin RGB headers.
5
Leak-test the assembled loop before powering on the PC.

You also need a pump, CPU and GPU water blocks, radiators and fans, tubing, fittings, stop plugs, and coolant.

Barrow’s V1 routing example. Follow the ports on your own GPU block.

FAQ

Will this O11 Dynamic distro plate fit the EVO?

Barrow specifies the original PC-O11 Dynamic (O11DX or O11DW). The O11 Dynamic EVO is a different case.

Does the side plate come with a pump?

Buy the pump separately. Barrow lists the SPB17-T PLUS through-hole pump for this V1 plate.

Can I sync the lighting with my motherboard?

Use a compatible adapter cable and a 5V 3-pin ARGB header. The strip is incompatible with 12V 4-pin RGB.

Do I need 14 mm tubing?

The 14 mm OD hard tube appears in Barrow’s example. Match your fittings to your tubing and use G1/4 threads at the plate.

Notes
  • All pumps, radiators, reservoirs, cases, fittings, and other products in details photos are for reference only.
  • As Barrow upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc., If not notified in time, the Barrow's latest real object shall prevail
  • The pipe of GPU water block layout are for reference only Actual operation is based on the direction of the water block outlet and inlet