Description
The Barrow PHCD-PA is a USB-C-powered Peltier cooler that clips onto the back of a smartphone during gaming or livestreaming. Its cold plate draws heat from the phone, and the built-in fan moves air through the heat sink to release it. The adjustable clip fits phones 65–80 mm wide.
Measure your phone where the clip will sit.
The cold plate should sit flat against the back of the phone.
The thermoelectric module draws heat from the contact plate. A seven-blade centrifugal fan moves air to cool the finned heat sink on the hot side.
The clip extends to grip both sides of the phone. Soft rubber pads inside the jaws help keep the cooler in place and protect the phone edges from scratches.
| Model | PHCD-PA |
|---|---|
| Cooling system | Thermoelectric module, finned heat sink, and seven-blade centrifugal fan |
| Temperature control | Built-in control circuit |
| Cooler length | 78.5 mm closed, 92 mm extended |
| Cooler width | 39 mm |
| Cooler thickness | 37.3 mm |
| Weight | 50 g |
| Power input | USB-C |
| Required USB power adapter | 5 V, 2 A or higher |
| Lighting | Built-in fan light with a dedicated button |
The thermoelectric module draws heat from the back of the phone, and the fan helps the heat sink release it to the surrounding air.
Measure where the clip will sit. The phone should be 65–80 mm wide and up to 9.5 mm thick there.
Use a 5 V USB-A power adapter rated for at least 2 A with a USB-A to USB-C cable.
Yes. The dedicated Light button toggles the fan light.
Yes. Barrow notes that moisture can condense on the cooler surface as it cools.