Description
This Barrow and Barrowch kit is for building a soft-tube liquid cooling loop around one Intel or AMD CPU or a GPU with a matching water block. A 240 or 360 mm radiator houses the pump, reservoir, and fans in one assembly. Each kit supplies the selected water block and the tubing and fittings to connect it.
Match the water block to your hardware and check the radiator clearance.
Not compatible:
Intel CPU option (CPI-T / CPIE-T). Barrow lists LGA115x, LGA1200, X99, and X299 for the original Intel block.
AMD CPU option (CPAI-T / CPAIE-T). Barrowch lists AM4 in its original CPU kit documentation.
CPU options. Before ordering, send FormulaMod your exact motherboard model to confirm the mounting hardware supplied with your kit.
GPU options. Before ordering, give FormulaMod your card brand, full model number, and PCB revision so the matching water block and, for double-sided cooling, active backplate can be confirmed.
Case clearance. Verify the full assembly dimensions in the table, including space at the pump end and room to route the tubing.
Mount the DARIDP-30 as one unit. The pump supports PWM or manual speed adjustment, and the radiator has dedicated fill ports.
The single-sided option cools the component side of the card. The double-sided option adds an active water-cooled backplate for a matching PCB.
The Intel and AMD CPU options come with an HDMI display water block for their respective platforms. Choose by motherboard socket.
| 240 mm assembly | DARIDP-30 240 · 309.10 × 124 × 65.30 mm · 2 × 120 mm fans |
|---|---|
| 360 mm assembly | DARIDP-30 360 · 429.10 × 124 × 65.30 mm · 3 × 120 mm fans |
| Radiator material | Copper radiator core |
| Pump | 12 V DC, 17 W · PWM or manual speed control |
| Pump connections | 4-pin peripheral Molex power and separate 4-pin PWM signal |
| Rated pump maxima | 960 L/h flow · 5–6 m head |
| Radiator connections | G1/4 inlet and outlet · dedicated fill ports |
| Fan connector | Barrow 6-pin PWM, connects to the fan and lighting controller |
| Lighting sync | Barrow LRC 2.0 via 5 V 3-pin motherboard ARGB |
| GPU single-sided SKU | 240 mm GCI-T1 360 mm GCIE-T1 |
| GPU double-sided SKU | 240 mm GCI-T2 360 mm GCIE-T2 |
| Intel CPU SKU | 240 mm CPI-T 360 mm CPIE-T |
| AMD CPU SKU | 240 mm CPAI-T 360 mm CPAIE-T |
GPU options include thermal pads. Acrylic-top full-cover gaming GPU blocks include 2 × G1/4 stop plugs. If the matched GPU block has a metal top or its top material is unconfirmed, supply your own G1/4 stop plugs for any unused ports.
Supply your own PC loop coolant.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Have PC loop coolant, radiator cleaner, and thermal paste on hand. Follow the instructions for your selected block and leak tester.
Choose one CPU or GPU water block when you configure the kit. Each kit includes the selected block.
Provide your card brand, full model, and PCB revision before ordering. Confirm the matching block and, for the double-sided option, the active backplate.
Pick the version your case can accommodate. Check the full 309.10 or 429.10 mm assembly length, the 124 mm width and 65.30 mm thickness, and space for the tubing.
Yes. The 17 W pump, reservoir, radiator, and fans come as one assembly.
Supply your own PC loop coolant and fill the loop after an air leak test.