Description
The specifications, compatibility, and wiring instructions below apply to the Adapter cable option (Barrow ZBDZJX-5M). This standard adapter connects a matching Barrow LRC 2.0 Aurora lighting lead to a 5V 3-pin motherboard ARGB header. Once connected, the motherboard can apply its lighting effects to the Barrow component.
Check the connectors on both sides before ordering.
Not compatible:
Barrow’s product instructions exclude Gigabyte motherboards for this adapter.
Check your motherboard manual for the +5V, data, and ground positions and make sure the missing pin lines up with the blocked position on the plug.
On the standard adapter, the shrouded end connects to the Barrow lighting lead. The arrow-marked end plugs into your motherboard’s matching ARGB header.
Line up the molded arrow with the motherboard header’s +5V pin before inserting the plug.
| Model (standard adapter) | Barrow ZBDZJX-5M |
|---|---|
| Motherboard connector | 5V 3-pin ARGB female, with one blocked position |
| Lighting connector | Barrow LRC 2.0 Aurora 5V, shrouded 3-pin |
| Standard wire length | 100 mm (10 cm) |
| Standard cable color | Black |
For manual lighting control, see the Barrow ARSKZQ manual controller and select “5v Manual controller” on that product page.
You’ll need a motherboard with the matching ARGB header and a Barrow LRC 2.0 Aurora lighting component with the matching plug.
On the Adapter cable option (Barrow ZBDZJX-5M), the motherboard end is a 5V 3-pin ARGB female connector. The other end has a shrouded 3-pin connector for the matching Barrow LRC 2.0 Aurora lighting lead.
Use a matching 5V 3-pin ARGB header. A 12V 4-pin RGB header uses a different voltage and pin layout.
Barrow specifies a wire length of 100 mm (10 cm) for the standard ZBDZJX-5M.
The standard adapter connects the lighting lead to a compatible motherboard header directly. The motherboard controls the lighting in that setup.