PC Water Cooling Pump, 17 W PWM | Barrow SPB17 PLUS

€52.64 piece
items available
View Details
Barrow · SPB17 PLUS

17 W PWM pump for custom PC water cooling

The Barrow SPB17 PLUS circulates coolant in a custom PC water cooling loop. Its acrylic pump top can accept a compatible reservoir directly, and the reservoir is sold separately. The 17 W pump offers automatic PWM speed control or manual adjustment, and its finned aluminum housing helps dissipate heat.

Fits
Barrow TKDDCG50 reservoirs
Pump power
12 V DC / 17 W
Ports
G1/4 inlet and outlet
Lighting
LRC 2.0 / 5 V ARGB

Reservoir Compatibility

A compatible Barrow TKDDCG50 reservoir mounts directly to the pump and is sold separately.

  • ✓Barrow TKDDCG50-60

Check the reservoir model before ordering. The G1/4 specification refers to the pump’s coolant ports.

Key Specifications

ModelSPB17 PLUS
Pump power12 V DC, 17 W
Pump topAcrylic
HousingFinned aluminum alloy
Inlet and outletG1/4, top-center inlet and side outlet
Speed control4-pin PWM signal or manual adjustment, with separate pump power
LightingBarrow LRC 2.0, via the included adapter to a compatible 5 V 3-pin ARGB header
Housing colorsBlack or silver

What's in the Box

1 × Barrow SPB17 PLUS pump kitMotherboard ARGB lighting adapter cable

The reservoir and standalone lighting controller are sold separately.

Installation & Use

1
Keep the pump inlet facing up so coolant can flow in by gravity.
2
Connect the loop to the side outlet with a G1/4 fitting. Check the inlet and outlet before use.
3
Connect the separate 12 V pump power lead. For automatic speed control, connect the 4-pin PWM lead to a compatible PWM header.
4
Let coolant fill the pump before switching it on. Never run the pump dry.

FAQ

Does the pump come with a reservoir?

The reservoir is sold separately. A Barrow TKDDCG50-60 can mount directly to the pump.

How do I switch between PWM and manual speed control?

The pump ships in PWM mode. Turn the knob clockwise to enter manual mode, or fully counterclockwise to return to PWM.

Where do I plug in the lighting cable?

Use the included lighting adapter cable to connect the LRC 2.0 lead to a compatible 5 V 3-pin ARGB motherboard header.

Notes
  • In the event of an upgrade in the appearance of the product, without prior notice, the actual product will prevail.