DDC-Style Pump for PC Water Cooling, Barrow SPB17-S-PLUS, 17W PWM, 5V ARGB

$54.20 piece
items available
View Details
Barrow · SPB17-S-PLUS

17 W PWM water cooling pump with an acrylic top

The Barrow SPB17-S-PLUS is a 17 W DDC-style pump that circulates coolant in a custom PC water cooling loop. It comes with an acrylic pump top and uses G1/4 fittings at the inlet and outlet. Use motherboard PWM control or set the speed by hand with the adjustment knob.

Fits
G1/4 fittings
Pump power
17 W at 12 V DC
Max flow
960 L/h
Lighting
5 V ARGB

Fittings and Connections

  • ✓G1/4 male fittings for the pump inlet and outlet
  • ✓4-pin PWM motherboard header for automatic speed control
  • ✓For motherboard lighting control, use the included adapter cable to connect the pump’s LRC 2.0 lighting lead to a 5 V 3-pin ARGB header.

Match the pump's separate power lead to the corresponding connector on your power supply.

The LRC 2.0 lighting uses its own 5 V ARGB lead, separate from the pump power and speed control connections.

Design Highlights

Finned aluminum housing

The fins along the base help dissipate heat from the pump circuitry.

Acrylic pump top included

The clear top comes installed on the pump. Its top and side ports connect the pump to your loop.

Key Specifications

ModelSPB17-S-PLUS
Pump topClear PMMA acrylic
HousingFinned aluminum alloy
FinishBlack or silver
Inlet and outletG1/4 female threads
Rated electrical input12 V DC, 1.4 A, 17 W
Speed control4-pin PWM lead or manual adjustment knob
Maximum speed4,000 RPM
Maximum flow960 L/h
Noise (Barrow specification)Under 40 dB
Pump weight380 g
LightingBarrow LRC 2.0, 5 V ARGB

Which Version Do I Need?

Choose the pump version based on how it connects to your loop.

Barrow SPB17-S-PLUSTHIS PAGE
Choose this assembled pump if you want a separate pump with its own acrylic top and G1/4 ports.
Choose this version for a build that pairs the pump directly with a compatible reservoir.
Choose the through-hole version if your Barrow distro plate specifies this pump.

What's in the Box

1 × Pump assembly with acrylic top and aluminum housingMotherboard ARGB adapter cable (5 V, 3-pin)

A standalone lighting controller is sold separately.

Installation & Use

1
Mount the pump with its inlet facing up. Identify the inlet and outlet before connecting the G1/4 fittings and tubing.
2
With the system off, connect the pump power lead to the matching connector on your power supply. Connect the separate 4-pin lead to a PWM-capable header for motherboard speed control.
3
For motherboard lighting control, use the included adapter cable to connect the pump’s LRC 2.0 lighting lead to a 5 V 3-pin ARGB header.
4
Fill the loop and let coolant feed the pump inlet by gravity before switching it on. Never run the pump dry. Leak-test the filled loop before powering the rest of the PC.

For a complete loop, plan for G1/4 fittings, tubing, a radiator, water blocks, and coolant.

FAQ

Do I need to buy a separate pump top?

The acrylic pump top comes installed on the SPB17-S-PLUS.

How do I switch between manual and PWM speed control?

The pump ships in PWM mode. Turn the adjustment knob clockwise to enter manual mode. Turn it fully counterclockwise to return to PWM.

Do I need a separate lighting controller?

For motherboard lighting control, use the included adapter cable to connect the pump’s LRC 2.0 lighting lead to a 5 V 3-pin ARGB header. A standalone lighting controller is sold separately.

Which fittings do I need?

Both ports take G1/4 male fittings. Choose fittings that also match the tubing in your loop.

Notes
  • In the event of an upgrade in the appearance of the product, without prior notice, the actual product will prevail.