Description
The Barrow RGTP-H is clear polyurethane (PU) tubing that carries coolant between components in a custom PC water cooling loop. It comes in 1-meter pieces and fits 10x16mm soft-tube compression fittings. Cut each run to the length you need for your case. The clear walls let you see the coolant inside.
Use compression fittings sized for 10 × 16 mm soft tubing.
Not compatible:
Match both diameters on the fitting label. Look for 10 × 16 mm (ID × OD) or 3/8 in ID × 5/8 in OD, and make sure the fitting is for soft tubing.
Measure each run inside your case and cut it to length. Leave enough room for the tubing to curve without kinking.
A square cut helps the tube seat evenly on the fitting. The collar compresses the tube wall against the barb.
| Model | RGTP-H |
|---|---|
| Material | Polyurethane (PU) |
| Color | Clear |
| Nominal size (ID × OD) | 10 × 16 mm (3/8 in × 5/8 in) |
| Barrow drawing (ID × OD) | 9.50 × 15.90 mm |
| Length per piece | 1 m |
| Tubing temperature resistance | −20 to 90 °C (Barrow specification) |
Both options below have a nominal size of 10 × 16 mm. Choose the tube material you want for your loop.
Have matching soft-tube compression fittings, a tubing cutter, and coolant for your loop on hand.
They’re the nominal inner and outer diameters, respectively. Barrow’s drawing lists 9.50 mm ID and 15.90 mm OD.
It’s made of clear polyurethane (PU).
Choose a G1/4 compression fitting specifically sized for 10 × 16 mm soft tubing, such as Barrow THKN-3/8-V4. The G1/4 thread connects the fitting to the component.
You’ll receive three separate 1 m pieces.