240mm / 360mm Radiator Pump Combo with Reservoir and Fans | Barrow DARIDP-30

Barrow · DARIDP-30

Radiator pump combo for custom PC water cooling

The Barrow DARIDP-30 combines a radiator, pump, reservoir, and fans in one assembly for a custom PC water cooling loop. It mounts in a chassis radiator position and joins your loop through G1/4 fittings. Keeping the pump and reservoir at the radiator frees up space elsewhere in the case.

Fits
240 mm or 360 mm radiator mounts
Ports
G1/4 inlet and outlet
Pump
17 W, PWM or manual control

Case and Loop Fit

Compare the full assembly dimensions with the space at your radiator mount.

  • ✓240 mm radiator mount, with clearance for a 309.10 × 124 × 65.30 mm assembly
  • ✓360 mm radiator mount, with clearance for a 429.10 × 124 × 65.30 mm assembly
  • ✓Custom loop with G1/4 fittings

Check that the case also leaves room for fittings, tubing, and access to a fill port. Choose a separate water block that fits your CPU or graphics card.

Design Highlights

Radiator, pump, reservoir, and fans in one assembly

The aluminum alloy bracket holds the 120 mm fans against the copper radiator and closes the gap between the fans and core.

PWM or manual pump speed

The pump ships in PWM mode. Turn the speed knob clockwise to switch to manual control, or turn it fully counterclockwise to return to PWM.

Coolant level at a glance

The acrylic window lets you see the coolant level. Three fill points let you choose an access point that is reachable in your build.

Key Specifications

ModelBarrow DARIDP-30
240 mm assembly (L × W × T)309.10 × 124 × 65.30 mm
360 mm assembly (L × W × T)429.10 × 124 × 65.30 mm
Radiator coreCopper
Fan bracket / pump housingAluminum alloy
Reservoir windowAcrylic
Loop ports1 × G1/4 inlet, 1 × G1/4 outlet
Fill ports3
Pump electrical input12 V DC, 17 W
Pump speed4,000 RPM
Pump max. flow rate960 L/h
Pump max. head5–6 m
Pump wiring4-pin peripheral Molex power and separate 4-pin PWM signal
Fans2 × 120 mm (240 mm) or 3 × 120 mm (360 mm)
Fan connectorBarrow 6-pin PWM, 12 V motor supply
Color optionsBlack or silver

Barrow dimension drawing. 240 mm above, 360 mm below. Dimensions are in millimeters.

Which Version Do I Need?

Both radiator sizes come in black or silver. Select With controller to get a hub for the included fans. If you already have a Barrow DK401-7 or DK301-16, select No controller.

Barrow DARIDP-30THIS PAGE
Choose the 240 mm assembly with two fans or the 360 mm assembly with three fans to match your case.
Get this hub separately if you need a controller for the radiator's included 6-pin fans.

What's in the Box

1 × radiator assembly with integrated pump, reservoir, and fans1 × fan controller (With controller option only)

Installation & Use

1
Clean the radiator with a dedicated radiator cleaning solution before first use. Mount the assembly in the case radiator position without overtightening the screws.
2
Connect the water block and tubing to the assembly's G1/4 inlet and outlet. Follow the port diagram to keep the flow in the intended direction.
3
Connect the pump's 4-pin peripheral Molex lead to PSU power and its 4-pin PWM lead to a PWM header for automatic speed control. Connect the fans to the fan controller's 6-pin ports.
4
Add coolant through an accessible fill port, check the level through the window, and reinstall the fill plug. Prime the pump with coolant before applying power. Never run it dry.
5
Leak-test the filled loop with the rest of the PC hardware unpowered. Clean dust from the radiator fins periodically.

You also need a water block for your hardware, G1/4 fittings, tubing, and coolant. If you selected No controller, supply a Barrow DK401-7 or DK301-16.

In the upper view, the top open port is the outlet and the lower open port is the inlet. The other callouts show the three plugged fill ports.

FAQ

Does the DARIDP-30 include a CPU or GPU water block?

Choose a separate water block for your hardware. The DARIDP-30 supplies the radiator, pump, reservoir, and fans for the loop.

How thick is the assembled radiator pump combo?

Both assemblies are 65.30 mm thick. The 240 mm version is 309.10 mm long and the 360 mm version is 429.10 mm long, so measure the available space before ordering.

Can I plug the radiator fans straight into a motherboard fan header?

No. Connect the included 6-pin fans directly to a Barrow DK401-7 or DK301-16 controller. The pump uses a separate 4-pin PWM signal lead.

How do I fill the built-in reservoir?

Use an accessible fill port and check the coolant level through the acrylic window. Refit the fill plug before running the pump and keep coolant in the pump during testing.

Notes
  • The factors of man-made damage (the large-scale fall of the wave plate, the water leakage caused by the screw penetration of the water channel, etc.) are not within the scope of the warranty;
  • In case of product appearance structure upgrade, no notice will be given, the actual product shall prevail