Description
The Barrow SPB17-TM combines a 17W pump and a mini reservoir for custom PC liquid cooling loops with G1/4 fittings. The 80 mm tall assembly puts the coolant supply directly above the pump for compact builds. Adjust the pump speed from the motherboard with PWM or use the manual speed knob.
Check the fittings, wiring, and space in your build.
Allow space above and beside the pump for fittings, tubing, and access when filling the reservoir. Keep the pump inlet facing up so coolant can feed it by gravity.
The clear acrylic reservoir sits directly above the pump. The aluminum alloy housing uses fins to dissipate heat from the pump electronics.
The pump ships in PWM mode. Turn the knob clockwise to switch to manual control, or turn it all the way counterclockwise to return to PWM.
| Model | Barrow SPB17-TM |
|---|---|
| Housing colors | Black or silver |
| Reservoir and pump housing | Acrylic reservoir, finned aluminum alloy pump housing |
| Body height | 80 mm |
| Unit weight | 380 g |
| Port thread | G1/4 |
| Port layout | Three inlets and one outlet |
| Rated pump power | 17 W |
| Rated pump voltage | 12V DC |
| Rated current | 1.4 A |
| Pump control | 4-pin motherboard PWM or manual knob |
| Maximum speed | 4,000 RPM |
| Maximum flow rate | 960 L/h |
| Maximum head | 5–6 m |
| Lighting | Barrow LRC 2.0 5V ARGB |
| Barrow-listed temperature limit | Below 60 °C |
| Barrow-listed noise | Below 40 dB |
| Barrow-listed service life | Over 50,000 hours |
Match the model to how you plan to mount and feed the pump.
A standalone lighting controller is sold separately.
To complete the loop, you’ll also need your water block or blocks, radiator, tubing, matching G1/4 fittings, plugs for unused ports, and coolant.
Yes. The mini reservoir and 17W pump form one assembly.
Turn the speed knob clockwise to enter manual mode. Turn it fully counterclockwise to return to motherboard PWM control.
The outlet is the lower side port, near the pump housing. The upper side port and both top ports are inlets.
Use the included lighting adapter cable with a compatible 5V 3-pin ARGB motherboard header. A standalone LRC 2.0 lighting controller is sold separately.