Description
The Barrow YKLZS1-T02 is a clear acrylic stop plug for unused G1/4 ports in a custom PC water cooling loop. Its male thread screws into the port, and an O-ring under the head seals against the port face. The 18 mm head diameter helps you check clearance around neighboring fittings.
Use this plug to close an unused female G1/4 inlet or outlet.
Check that the port face lets the O-ring seat evenly and that there’s room for the 18 mm head.
The circular face is smooth and transparent. The head is 4 mm thick, so check the available height if the port is under a panel.
The black O-ring comes fitted under the head. Check that it sits evenly before installing the plug.
| Model | YKLZS1-T02 |
|---|---|
| Body material | Acrylic |
| Color | Clear |
| Thread | G1/4 male |
| Head diameter | 18 mm |
| Head thickness | 4 mm |
| Length below the head | 5 mm |
| Seal | Fitted O-ring |
Each plug comes with a fitted O-ring.
G1/4 is the thread size. The 18 mm measurement is the outside diameter of the head.
Yes. The O-ring sits at the base of the thread under the acrylic head.
Use one plug per unused port you need to close. This listing offers a choice of 1 or 4 plugs.