G1/4 Clear Acrylic Stop Plug for PC Water Cooling — Barrow YKLZS1-T02

Barrow · YKLZS1-T02

Clear acrylic stop plug for unused water cooling ports

The Barrow YKLZS1-T02 is a clear acrylic stop plug for unused G1/4 ports in a custom PC water cooling loop. Its male thread screws into the port, and an O-ring under the head seals against the port face. The 18 mm head diameter helps you check clearance around neighboring fittings.

Fits
Female G1/4 ports
Body
Clear acrylic
Head diameter
18 mm
Order quantity
1 or 4 plugs

Fits / Use with

Use this plug to close an unused female G1/4 inlet or outlet.

Check that the port face lets the O-ring seat evenly and that there’s room for the 18 mm head.

Design Highlights

Clear, flat head

The circular face is smooth and transparent. The head is 4 mm thick, so check the available height if the port is under a panel.

O-ring at the base of the thread

The black O-ring comes fitted under the head. Check that it sits evenly before installing the plug.

Key Specifications

ModelYKLZS1-T02
Body materialAcrylic
ColorClear
ThreadG1/4 male
Head diameter18 mm
Head thickness4 mm
Length below the head5 mm
SealFitted O-ring

Barrow dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Barrow YKLZS1-T02THIS PAGE
Choose this plug for a clear acrylic head with a 4 mm profile.
Choose this G1/4 plug if you need a thinner, 2.5 mm head with a hex socket.

What's in the Box

1 unit option · 1 stop plug4 units option · 4 stop plugs

Each plug comes with a fitted O-ring.

Installation & Use

1
Use your component’s port diagram to identify the unused G1/4 port you want to close.
2
Check that the O-ring is in place, then thread the plug into the port until the ring seats against the port face.
3
Follow your loop component manufacturer’s leak-test procedure before powering on the computer.

FAQ

What does G1/4 mean on this acrylic plug?

G1/4 is the thread size. The 18 mm measurement is the outside diameter of the head.

Does the plug come with an O-ring?

Yes. The O-ring sits at the base of the thread under the acrylic head.

How many plugs do I need?

Use one plug per unused port you need to close. This listing offers a choice of 1 or 4 plugs.

Notes
  • Note: In case of product appearance structure upgrade,without further notice,in kind prevail