90° Rotary Hard Tube Fitting, G1/4, 12 or 14 mm OD | Barrow TWT90KND-K12 / TWT90KND-K14

Barrow · TWT90KND-K12 / TWT90KND-K14

90° rotary hard tube fitting for G1/4 ports

The Barrow TWT90KND is a 90-degree compression fitting for 12 mm or 14 mm outside-diameter hard tubing in a custom PC water cooling loop. Its male G1/4 end threads into a female G1/4 port. The brass elbow makes the turn at the port, and its rotary base lets you aim the socket along your tube run.

Fits
12 or 14 mm OD hard tube
Thread
Male G1/4
Bend
90°
Body
H59 brass

Fits / Use with

Match your tube’s outside diameter and check that the component has a female G1/4 port.

  • ✓TWT90KND-K12 fits 12 mm OD hard tubing.
  • ✓TWT90KND-K14 fits 14 mm OD hard tubing.

Design Highlights

Aim the elbow after mounting it

Thread the rotary base into a female G1/4 port, then turn the elbow to line up the socket with your tube. The turn happens in the fitting, so the tube can leave the socket straight.

Barrow cutaway of the hard-tube end.

A compression socket for rigid tubing

The tube seats inside the socket. The threaded collar secures it at the tube end.

Diamond knurling on both ends

The diamond texture gives you a grip on the compression collar and rotary base during assembly. Both tube sizes come in black, silver, white, or gold.

Key Specifications

ModelsTWT90KND-K12 and TWT90KND-K14
Hard-tube OD12 mm (K12) or 14 mm (K14)
Tube connectionHard-tube compression socket
Component connectionMale G1/4 on a rotary base
Elbow angle90°
Body materialH59 brass
ColorsBlack, silver, white, gold
K12 dimensions29 mm high to the thread shoulder, with 5 mm of male thread. Tube collar Ø20 mm, rotary base Ø18 mm.
K14 dimensions29.60 mm along the tube axis and 37.30 mm high including the male thread. Tube collar Ø22 mm, rotary base Ø20 mm.

Barrow drawings in millimeters. K12 above, K14 below.

Which Version Do I Need?

Choose by what you need to connect at the corner.

Barrow TWT90KND-K12 / TWT90KND-K14THIS PAGE
Choose KND to turn from a female G1/4 port to a hard tube.
Choose the double-ended KNS to join two hard tubes of the same outside diameter at 90°.

What's in the Box

1 × Barrow 90° rotary fitting in the size and color selected

Installation & Use

1
Screw the male G1/4 end into the matching female port. Swivel the elbow to point the tube socket along your planned route.
2
Measure the tube run, cut the tube square and deburr the cut end.
3
Seat the tube in the socket and secure it with the compression collar.
4
Leak-test the assembled loop before powering on the PC.

Have matching hard tubing, a loop component with a female G1/4 port, and tube cutting and deburring tools ready.

FAQ

Which version fits 14 mm hard tube?

Choose TWT90KND-K14 for 14 mm outside diameter. Choose TWT90KND-K12 for 12 mm outside diameter.

What kind of port does it screw into?

Both sizes have a male G1/4 thread that screws into a female G1/4 port on a water cooling component.

Can I change the direction the tube leaves the port?

Yes. During installation, swivel the elbow at the rotary base to aim it along your tube run.

How many fittings come in a pack?

One fitting in the size and finish you select.

Notes
  • In case of product appearance structure upgrade,without further notice,in kind prevail