ASUS ROG Hyperion GR701 Waterway Board | Barrow ASSGR701-SDB, G1/4, 5V ARGB

Barrow · ASSGR701-SDB

Waterway board for a custom loop in the ROG Hyperion GR701

The Barrow ASSGR701-SDB is an acrylic waterway board for a custom liquid cooling loop in the ASUS ROG Hyperion GR701 case. It brings the tubing runs for the pump, radiators, CPU block, and GPU block together at a single mounting location. The board has a built-in coolant chamber and ports for G1/4 fittings.

Fits
ASUS ROG Hyperion GR701
Body
Acrylic
Coolant ports
G1/4
Lighting
5V ARGB

Compatibility

Check your case model before ordering.

  • ✓ASUS ROG Hyperion GR701

The board mounts vertically between the motherboard tray and the front of the case.

Barrow’s example build shows the board behind the front fans.

Design Highlights

Coolant chamber and channels

The chamber and channels are built into the same plate. Run your tubing from the loop components to the corresponding ports in Barrow’s layout.

Threaded mounting inserts

Threaded inserts in the rear mounting holes take the case mounting screws and protect the acrylic threads.

Removable ARGB lighting strip

The LRC 2.0 Aurora strip lights the edge of the plate. Use a Barrow ARGB adapter cable for motherboard control, or choose the manual controller option to adjust the lighting by hand.

Key Specifications

Manufacturer modelASSGR701-SDB
Plate materialAcrylic
Coolant port threadG1/4
Lighting systemBarrow LRC 2.0 Aurora
Motherboard lighting connection5V 3-pin ARGB via a Barrow adapter cable
Controller optionsNo Controller or With Manual Controller

Which Version Do I Need?

Choose by how much of the GR701 loop you want to assemble from separate parts.

Barrow ASSGR701-SDBTHIS PAGE
Choose this board if you’re selecting your own loop parts. Pick With Manual Controller if you want to adjust the lighting by hand.
Choose this plate if you want the option of a bundled pump with a digital display.
Choose this single-GPU loop kit if you want a pump, radiators, and water blocks together. Provide your CPU and GPU models to match the blocks.
Choose this Bykski acrylic-and-aluminum plate if you want a choice of pump bundle or plate on its own.

What's in the Box

1 × waterway board1 × ARGB lighting stripMounting screws

Select “With Manual Controller” to add one manual lighting controller.

Installation & Use

1
Set the plate in the GR701’s vertical mounting area and start the mounting screws loosely.
2
Lay out and connect the loop with G1/4 fittings at the board. Tighten the mounting screws after the tubing lines up.
3
For motherboard lighting control, connect the strip through the Barrow ARGB adapter cable to a 5V 3-pin ARGB header.
4
Fill and leak-test the assembled loop according to the component instructions before powering on the PC.

For the setup shown, supply a pump, radiators, CPU and GPU water blocks, tubing, fittings, and coolant separately.

Barrow’s example routing. 1 hard-tube fitting · 2 rotary elbow · 6 vent valve · 7 radiator · 8 fan.

FAQ

Where does the board mount in the GR701?

It mounts vertically between the motherboard tray and the front of the case. Start the screws loosely and tighten them after aligning the tubing.

Which pump should I use?

Barrow’s GR701 layout shows the SPB17-T V2 through-hole pump. Supply it separately with either board option.

Can I control the lights from my motherboard?

Yes. Connect the strip through a Barrow ARGB adapter cable. For motherboard control, use only a 5V 3-pin ARGB header.

What fittings go on the board?

Use G1/4 fittings at the board’s coolant ports.

Notes
  • As Barrow upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc., If not notified in time, the Barrow's latest real object shall prevail