G1/4 Male-to-Male Adjustable Extender Fitting, 41–69 mm | Barrow TSSXK-B01 (White, Black, Silver)

Barrow · TSSXK-B01

G1/4 adjustable extender for facing water-cooling ports

The Barrow TSSXK-B01 is a male-to-male G1/4 extender fitting for custom PC water cooling. It joins two aligned, facing G1/4 female ports, such as those on a pair of GPU water blocks. The straight body telescopes to bridge a 41–69 mm gap between the port faces.

Fits
G1/4 female ports
Adjustable span
41–69 mm
Body
H59 brass

Fits / Use With

Use with two G1/4 female water-cooling ports that face each other on the same axis.

Before ordering, confirm that the gap between the flat port faces is 41–69 mm and that the 20 mm end rings have room to fit.

Design Highlights

Telescoping body

The inner section slides along the fitting’s axis to match the gap between the ports.

Knurled end rings

Diamond knurling gives you a grip as you thread the fitting into the ports.

Key Specifications

ModelTSSXK-B01
ThreadG1/4 male at both ends
Adjustable span41–69 mm between sealing faces
End ring diameter20 mm
Thread length5 mm per end
Body materialH59 brass
Surface treatmentElectroplated
ColorsWhite, Black, Silver

Barrow drawing. The 41 mm and 69 mm dimensions run between the sealing faces. All dimensions are in millimeters.

Which Version Do I Need?

Measure from one port face to the other and choose the model whose range covers that gap.

For gaps of 16–22 mm.
For gaps of 22–31 mm.
TSSXK-B01THIS PAGE
For gaps of 41–69 mm.

What's in the Box

1 × Barrow TSSXK-B01 extender fitting

Installation & Use

1
Check the alignment and spacing of the two port faces. Leave enough room around each port for the end ring.
2
Seat the male threads in the facing ports. Keep the telescoping body within its 41–69 mm range as you fit both ends.
3
With the loop assembled, follow your leak tester’s instructions to check for leaks before adding coolant.

You’ll need two water-cooling components with facing G1/4 female ports and a loop leak tester for the dry check.

FAQ

Does the 41–69 mm span include the threads?

Barrow measures the span between the sealing faces. Each male thread extends 5 mm beyond its sealing face.

Can I use this between two GPU water blocks?

Yes, when their G1/4 female ports face each other on the same axis and the gap between the port faces is 41–69 mm.

What colors can I order?

This listing offers White, Black, and Silver.

Which version fits a 25 mm gap?

The TSSXK-A01 covers gaps from 22 to 31 mm.

Notes
  • Barrow may update the appearance or construction of the fitting. Refer to the part you receive.