Open-Frame PC Case for Water Cooling, Barrowch AF1 Limited Edition

Barrowch · AF1

Open-frame PC case for custom water cooling

The Barrowch AF1 is an open-frame PC case for custom water cooling. Its upright aluminum frame supports E-ATX builds and puts the motherboard, graphics card, and tubing on display. Radiator brackets mount on both sides of the frame. The case comes with mounting hardware, and PC and water cooling components are sold separately.

Fits
E-ATX to Mini-ITX
Radiator mounts
Up to 3 × 360 mm
Frame
Aluminum alloy
Expansion slots
7

Motherboard & Radiator Compatibility

The AF1 accepts these motherboard form factors.

  • ✓E-ATX
  • ✓ATX
  • ✓microATX
  • ✓Mini-ITX

The radiator brackets accept up to three 360 mm radiators. Check your motherboard mounting points and allow space for your radiator, fans, and fittings before ordering.

Design Highlights

Barrowch build example. PC hardware and water cooling parts are sold separately.

Upright display frame

The open front puts the motherboard and tubing in view. The CNC-machined side trim has 30° corners and an etched edition number.

Barrowch example showing both rear radiator positions.

One radiator in front, two in back

The three included brackets let you put one 360 mm radiator below the motherboard and two behind the mounting plate. Plan your tubing route between the front and rear assemblies before fixing them in place.

Barrowch expansion-slot detail.

Expansion slots and rear cable cover

The graphics card bracket provides seven expansion slots. A separate rear cable cover hides the power supply cables.

Key Specifications

ModelBarrowch AF1 Limited Edition
Frame materialAluminum alloy
Bare frame dimensions (W × H × D)554 × 504 × 170 mm
MotherboardsE-ATX, ATX, microATX, Mini-ITX
Radiator capacity3 × 360 mm (1 front, 2 rear)
Fan mounting capacityUp to 9 × 120 mm
Expansion slots7
Frame Style optionsBlack (AF1_BK), Red (AF1_RD), Titanium Grey (AF1_GY)

Barrowch dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Choose by motherboard size and how you want to display the build.

Barrowch AF1THIS PAGE
Choose the upright AF1 for an E-ATX or ATX build or a loop that needs three 360 mm radiator positions. Black, Red, and Titanium Grey change the trim on the same black frame.
Choose Pomfret for a compact ITX display build with an adjustable frame angle. Select the version that matches your graphics card bracket height.

What's in the Box

1 × motherboard mounting plate2 × feet1 × left and 1 × right foot adapter2 × front and 2 × rear trim panels1 × power supply bracket1 × cable cover3 × radiator brackets1 × graphics card bracketTwo-pin lead

The parts listed here make up one AF1 frame set.

Mounting hardware and hex keys are included.

Barrowch bare-frame view.

Installation & Use

1
Attach the feet, graphics card bracket, and rear power supply bracket. Fit the motherboard standoffs for your board.
2
Fit the fans and radiators to their brackets. Secure the power supply and mount the assembled radiator brackets to the front and rear positions you plan to use.
3
Fit the loop fittings on the frame and front radiator. Mount the motherboard, followed by the reservoir, the pump and its fittings, and the CPU water block. Install the graphics card with its water block already attached.
4
Connect the tubing. Fit the power switch into the opening in the rear cable cover next to the power supply, then secure the cover to the frame.

For the build shown, supply your PC components, radiators, fans, pump, reservoir, water blocks, fittings, tubing, and coolant separately.

Barrowch assembly drawing for the front radiator bracket.

FAQ

Can I install three 360 mm radiators at once?

Yes. Use one bracket on the front and two on the rear. Barrowch lists the Barrow Dabel-28b 360 as an example radiator for this layout.

Which motherboards fit the AF1?

The chassis supports E-ATX, ATX, microATX, and Mini-ITX motherboards.

Do I get the water cooling parts shown in the photos?

This listing includes the case frame and its mounting accessories. The pictured radiators, fans, pump, reservoir, tubing, and display are sold separately.

What changes when I select Red or Titanium Grey?

These options change the color of the trim on the black chassis. The pictured tubing and coolant colors are part of the demonstration builds.

Notes
  • 1. This link only sells the case frame (including case installation accessories). Does not include other water cooling products.
  • 2. The hardware (such as graphics card, motherboard, RAM, CPU, etc.) and water loop products (such as tubes, fittings, GPU block, CPU block, radiator, fans, etc.) in the picture are for reference and display.
  • 3. This listing includes the case frame and the mounting accessories listed above.
  • 4. If you are interested in its water cooling plan, please contact us.
  • In case of product appearance structure upgrade, without further notice, in kind prevail.