Barrowch · FBRAMLD-01
Passive DDR5 RAM cooler for a single module
The Barrowch FBRAMLD-01 is a passive aluminum-alloy heatsink for one desktop DDR5 memory module. The housing screws together around the bare module and spreads heat from the memory chips into the surrounding air. Its side plates extend toward the edge connector to cover DDR5 chips positioned close to the contacts.
Fits
Standard-width desktop DDR5
Coverage
One memory module
Compatibility
- ✓For a standard-width desktop DDR5 memory module.
The housing mounts around a bare memory module. If the module already has a factory heat spreader, remove it before fitting this housing.
Check the space around your memory slots against the housing dimensions before ordering.
Design Highlights
Passive cooling
The aluminum housing releases heat into the surrounding air. Barrowch’s illustration shows air rising from the openings along the top of the heatsink.
Two housings shown to illustrate the profile. Each unit covers one memory module.
Extended DDR5 side plates
The plates reach down toward the module’s edge connector to cover memory chips close to the gold contacts.
Key Specifications
| Model / SKU | FBRAMLD-01 |
|---|
| Cooling type | Passive |
|---|
| Housing material | Aluminum alloy |
|---|
| Color | Black |
|---|
| Housing size (length × height × thickness) | 134 × 32 × 7.9 mm |
|---|
| Coverage per unit | One desktop DDR5 module |
|---|
Manufacturer’s housing dimensions in millimeters.
Which Version Do I Need?
Barrowch FBRAMLD-01THIS PAGE
Choose this housing to passively cool one DDR5 memory module.
Choose the top-mounted fan module for active airflow. Kit options pair it with two or four FBRAMLD-01 housings.
Choose the TFT-equipped RAM water block for a custom loop with two to four memory modules. The paired kits include two or four FBRAMLD-01 housings.
Compare this taller 42 mm heatsink for wide memory modules. It has no mounting holes for a RAM water block.
What's in the Box
1 × FBRAMLD-01 heatsink assembly for one DDR5 module
Installation & Use
1Shut down and unplug the PC. Remove the DDR5 module and take off its existing heat spreader if it has one.
2Remove the heatsink screws, separate the two plates, and set the screws aside.
3Apply thermal pads at the memory chip contact areas. Fit the plates around the module and reinstall the original heatsink screws.
4Align the module’s notch with the motherboard slot and press it in until the latches secure it.
Have your desktop DDR5 module, thermal pads for the chip contact areas, and a screwdriver that fits the heatsink screws ready.
Manufacturer’s assembly diagram. Blue outlines show the pads and screw positions.
FAQ
How many heatsinks do I need for two DDR5 sticks?
Use two housings, one per module. Each unit contains one FBRAMLD-01 heatsink assembly.
Does this DDR5 RAM heatsink need a fan or a water block?
The housing works as a passive heatsink on its own. Choose a separate FBRAMFD fan module if you want active airflow, or an FBRWB-PA4 kit if you are adding RAM to a custom loop.
Can I keep the heat spreader already on my memory?
Remove the original heat spreader before installing the FBRAMLD-01. The new housing fits around the bare memory module.
What does the 32 mm height refer to?
It is the height of the heatsink housing. The housing measures 134 × 32 × 7.9 mm (length × height × thickness).
Notes- The RAM block and RAM in the picture are only shown as a reference for usage scenarios.
- In case of product appearance structure upgrade, without further notice, in kind prevail.