Description
The Barrowch FBLTFHAT-04N V2A is a CPU water block for AMD Ryzen Threadripper systems with a TR4 socket and X399 motherboard. Its nickel-plated copper cold plate transfers heat from the processor to a custom liquid cooling loop. The built-in TFT screen shows coolant temperature in real time.
Check the CPU socket on your motherboard before ordering.
The monochrome TFT screen shows the temperature of the liquid circulating through the block.
Coolant flows through up to 49 microchannels in the nickel-plated copper cold plate. The grooves increase the surface area in contact with the coolant.
The screen and addressable lighting share a Barrow LRC 2.0 input. Connect the block to a compatible LRC 2.0 controller. For motherboard lighting sync, use an adapter to connect to a 5V 3-pin ARGB header.
| Model | FBLTFHAT-04N V2A |
|---|---|
| CPU socket | AMD TR4 (X399) |
| Cold plate | Nickel-plated copper, 58 × 58 mm |
| Microchannels | Up to 49, with 0.4 mm slot width and 0.2 mm spacing |
| Body and panel | Clear acrylic and CNC-machined aluminum alloy |
| Panel colors | Black, silver, or red |
| Port thread | G1/4 inlet and outlet |
| Display | Monochrome TFT coolant temperature display |
| Display and lighting input | Barrow LRC 2.0 |
| Motherboard lighting sync | 5V 3-pin ARGB via an adapter |
These two Barrowch blocks have built-in displays and fit different AMD sockets.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
You also need a pump, reservoir, radiator with fans, coolant filter, tubing, matching G1/4 fittings, and coolant.
Barrowch lists AMD TR4. Check for an X399 motherboard with a TR4 socket before ordering.
It shows the temperature of the coolant flowing through the block.
Use G1/4 fittings for the inlet and outlet, with a fitting size that matches your tubing.
Yes. Use a compatible LRC 2.0 adapter with a 5V 3-pin ARGB header. Keep it off 12V 4-pin RGB headers.