Barrowch · FBFT07
Digital water flow meter with coolant temperature display
The Barrowch FBFT07 is an inline digital flow meter and coolant temperature sensor for custom PC water cooling loops. It connects through two G1/4 ports and displays both readings in real time on the same screen, so you can check coolant circulation and temperature at the meter.
Readings
Temperature and flow
Use With
Install the FBFT07 inline in a custom PC water cooling loop.
- ✓G1/4 male fittings matched to your tubing
- ✓Motherboard fan header that supplies a steady 12V at Full Speed
Check the thread on the meter side and the tubing size on the other side of each fitting.
Design Highlights
Two readings on one screen
The display shows coolant temperature in °C and flow in L/min at the same time.
The second panel shows the impeller and round washer in the reversed arrangement.
Set the inlet to suit your tubing route
The meter ships with the inlet on the right and the outlet on the left. To swap them, reorient the impeller and round washer before reconnecting the tubing.
Key Specifications
| Model | FBFT07 |
|---|
| Body material | POM |
|---|
| Ports | Two G1/4 female threads |
|---|
| Display | Coolant temperature (°C) and flow rate (L/min) |
|---|
| Power supply | Stable 12V from a motherboard fan header |
|---|
| Power connection | Plug-in connector on the underside |
|---|
| Colors | Black (FBFT07_BK) or White (FBFT07_WT) |
|---|
Which Version Do I Need?
Barrowch FBFT07THIS PAGE
Choose this model to read coolant temperature and flow directly at the meter.
Choose the FBFT08 loop protector for Barrowch’s documented overheat alarm and automatic shutdown functions.
What's in the Box
1 × Barrowch FBFT07 flow and temperature meter
A controller is sold separately.
Installation & Use
1Before connecting the meter, set the intended motherboard fan header to Full Speed in BIOS and confirm it supplies a steady 12V.
2Plan the tubing around the factory right-side inlet and left-side outlet. If you need to swap them, remove the end plate, reorient the impeller and round washer as shown above, and reinstall the plate.
3Connect both ports inline with G1/4 fittings sized for your tubing. Handle the meter by its housing and avoid pressing the display.
4Fill and leak-test the loop before powering the PC.
5With the PC off, use a compatible power lead to connect the meter to the configured fan header. Start the system and check the temperature and flow readings.
You’ll need two G1/4 fittings matched to your tubing and a motherboard fan header that can supply a steady 12V.
Barrowch’s motherboard fan header connection diagram.
FAQ
Can I read coolant temperature and flow at the same time?
Yes. The display shows temperature in °C and flow in L/min together.
How do I power the FBFT07?
Use a motherboard fan header that supplies a steady 12V. Set that header to Full Speed in BIOS before connecting the meter.
Can I use the left port as the inlet?
Yes. The meter ships with the inlet on the right. Reorient the impeller and round washer using the diagram above before using the left port as the inlet.
What fittings do I need for the FBFT07?
Use two G1/4 male fittings sized for your tubing.
Does the FBFT07 come in white?
Yes. Choose White (FBFT07_WT) or Black (FBFT07_BK) when ordering.
Notes- In case of product appearance structure upgrade , without prior notice, the actual product shall prevail.