Description
The Barrowch FBRAMFD is an active RAM cooler for desktop DDR5 memory fitted with Barrowch FBRAMLD-01 heat spreaders. Four PWM fans direct air over the heat spreaders to carry heat away from the memory. Choose the fan module on its own or pair it with two or four heat spreaders.
Use with desktop DDR5 DIMMs fitted with Barrowch FBRAMLD-01 heat spreaders.
Check the space above and around your DIMM slots before ordering.
The fans sit in an aluminum alloy housing and direct airflow over the memory. The motherboard controls their speed through a single PWM connection.
The fan base screws into the matching heat spreaders. The removable top cover gives you access to the mounting points.
| Model | FBRAMFD |
|---|---|
| Cooling | Four PWM fans |
| Fan speed | 8,000 RPM, PWM adjustable |
| Motherboard connection | 4-pin PWM fan header |
| Fan housing | Aluminum alloy |
| Fan module dimensions | 138 × 42 × 18 mm (L × W × H) |
| Fan module colors | Black or white |
| Matching heat spreader | FBRAMLD-01, black aluminum alloy |
| Heat spreader dimensions | 134 × 32 × 7.9 mm (L × H × T) |
| Spreader hole spacing | 113 mm inner pair, 123 mm outer pair |
The FBRAMFD air cooler and FBRWB-PA4 water block both pair with FBRAMLD-01 heat spreaders.
Choose black or white for the fan module in any configuration. Kit heat spreaders are black.
For the fan-module-only option, have a matching FBRAMLD-01 heat spreader for each DIMM you plan to cool.
Yes. The fan module comes in white or black, including in Kit A and Kit B. The heat spreaders are black.
This option contains one FBRAMFD fan module. Choose Kit A or Kit B if you also need heat spreaders.
Choose Kit A if you need two heat spreaders or Kit B if you need four. Each DIMM uses one heat spreader.
It uses four PWM fans for air cooling and connects to a 4-pin PWM fan header on the motherboard.