Bykski · B-VCLT
Replacement LED strip for Bykski CPU and GPU water blocks
The Bykski B-VCLT is a rigid replacement LED strip for Bykski CPU and GPU water blocks with a matching light channel and screw holes. It restores lighting on a block with a missing or damaged strip. Before ordering, match your original strip’s mounting revision, length, and lighting voltage.
Fits
Matching Bykski water blocks
Lighting
5V ARGB (RBW) or 12V RGB
Length options
70 mm (V1), 150 or 200 mm (V1/V2)
Fit and Lighting Connections
Check the side where the cable joins your original strip.
- ✓V1 · The cable joins the back of the board, opposite the LEDs.
- ✓V2 · The cable joins the same side of the board as the LEDs.
- ✓5V ARGB (RBW) · Use a Bykski 5V RBW controller or a matching Bykski adapter for a 3-pin 5V ARGB motherboard header.
- ✓12V RGB · Use a Bykski 12V RGB controller or a matching Bykski adapter for a 4-pin 12V RGB motherboard header.
Not compatible:
- ✗Swapping a V1 strip for a V2 strip or vice versa. The screw holes differ.
- ✗Connecting a strip to the other voltage’s controller or motherboard header.
- ✗Other brands’ lighting controllers.
Before ordering, check the original strip’s overall length and screw hole positions as well as its cable location and voltage.
Design Highlights
5V addressable RGB (RBW)
The 5V version can show different colors across the strip at the same time. Use it with Bykski 5V RBW lighting controls or a matching motherboard adapter.
12V RGB
The 12V version displays one color across the strip at a time. Choose it for a matching 12V RGB setup.
Key Specifications
| Series | Bykski B-VCLT |
|---|
| Construction | Rigid PCB with surface-mounted LEDs |
|---|
| V1 length options | 70, 150, or 200 mm in either lighting type |
|---|
| V2 length options | 150 or 200 mm in either lighting type |
|---|
| 150 mm V1 · both lighting types | 150 mm overall, 145 mm between screw hole centers |
|---|
| 200 mm V1 · both lighting types | 200 mm overall, 195 mm between screw hole centers |
|---|
| 150 mm V2 · 5V RBW | 162.17 mm overall, 145 mm between screw hole centers |
|---|
| 200 mm V2 · 5V RBW | 213.75 mm overall, 195 mm between screw hole centers |
|---|
Bykski’s 5V RBW V2 drawings show the 150 mm option above the 200 mm option. Dimensions are in millimeters.
Which Version Do I Need?
Choose the strip that matches your water block, then choose how you want to control its lighting.
Bykski B-VCLT LED stripTHIS PAGE
Select the mounting revision, lighting type, and length that match your original strip.
Choose this cable to connect the 5V RBW strip to a matching 3-pin 5V ARGB motherboard header.
Choose this controller for separate control of Bykski 5V RBW lighting.
What's in the Box
1 × replacement LED strip in the selected configuration
The lighting controller and motherboard sync adapter are sold separately.
Installation & Use
1Turn off and unplug the PC. Check the old strip’s cable side and mounting holes before removing it.
2Set the replacement flat in the original light channel and secure it at the matching screw points. Keep the board straight during installation.
3Connect it to the matching Bykski controller, or use the matching Bykski adapter to connect it to your motherboard’s lighting header. Align the power pin as shown in your motherboard manual before turning on the system.
You need a Bykski lighting controller or motherboard sync adapter that matches the chosen strip’s voltage.
Bykski’s 5V motherboard adapter illustration. The adapter is a separate accessory.
FAQ
How can I tell which LED bar fits my water block?
Check where the cable joins your old strip. V1 has the cable on the back of the PCB. V2 has it on the LED side. Compare the overall length and screw hole positions before ordering.
Can I connect a 5V RBW strip to a 12V RGB header?
Use a 3-pin 5V ARGB header with the matching Bykski adapter for RBW. The 4-pin 12V RGB header is for the 12V strip and its matching adapter.
How long is the 150 mm 5V RBW V2 strip?
The manufacturer drawing shows 162.17 mm overall and 145 mm between screw hole centers.
Can I sync the light strip with my motherboard?
Yes. Match the Bykski adapter and motherboard lighting header to your strip’s voltage. The adapter is sold separately.
Notes- Not responsible for any damage caused by or when using this product. Please use at your own risk.