60mm Water Cooling Tank – Bykski CT-4H60-AL, 80/130/180/240mm

Bykski · CT-4H60-AL

60 mm cylinder reservoir for custom PC loops

The Bykski CT-4H60-AL reservoir stores coolant for a separate pump in a custom PC water cooling loop. Its clear acrylic tube lets you check the coolant level at a glance. Connect it with G1/4 fittings and choose an overall length that leaves room in your case for tubing and filling.

Tube diameter
60 mm
End cap diameter
66 mm
Overall lengths
80 / 130 / 180 / 240 mm
Fits
G1/4 fittings

Compatibility

Use G1/4 fittings to plumb the reservoir into your loop. For direct mounting, Bykski lists these pump heads.

  • ✓Bykski B-NWD5-F60
  • ✓Bykski CP-PMD3COV-X
  • ✓Bykski CP-RX-X

Check the exact pump head and revision before ordering. Bykski's direct-mount example for the CP-PMD3COV-X shows a clear threaded top.

Design Highlights

Four lengths to match your case clearance

The length option includes both end caps. Measure the space at your mounting location and leave extra room for fittings, tubing bends, and access to fill the tank.

Removable end caps

Both caps come off for cleaning. Each end has a sealing ring, and the clear guide tube extends into the reservoir from the three-port cap.

Key Specifications

ModelCT-4H60-AL
Reservoir bodyClear acrylic
End capsBlack, removable
Tube outside diameter60 mm
End cap outside diameter66 mm
Overall length, caps installed80, 130, 180, or 240 mm
Port threadG1/4
Port layoutThree on one cap, one on the other

Bykski drawing, in millimeters. The line on the three-port cap points to a G1/4 port.

Which Version Do I Need?

Bykski CT-4H60-ALTHIS PAGE
Choose this dual-cap reservoir if you want a standalone tank connected to a separate pump by tubing.
Choose this single-cap reservoir if you already have a matching Bykski 60 mm threaded pump head and want the tube to mount directly to it.

What's in the Box

1 × reservoir with end caps2 × ring clamps2 × L-brackets2 × port plugsMounting screws and nuts

Bykski's parts illustration.

Installation & Use

1
Check clearance for the reservoir, fittings, tubing, and fill access at your chosen mounting location.
2
Secure the reservoir with the ring clamps, L-brackets, and mounting hardware.
3
For a separate pump, connect a reservoir outlet to the pump inlet with G1/4 fittings sized for your tubing. For direct mounting, attach the reservoir to the inlet side of the supported pump head. Seal unused ports with plugs.
4
Fill the reservoir before powering the pump. Keep coolant feeding the pump and check all connections for leaks while the rest of the PC is powered off.

You also need a pump, G1/4 fittings, matching tubing, and coolant. A complete loop also needs a radiator and water blocks for the components you plan to cool.

Bykski mounting example with a separately supplied pump.

FAQ

What does 60 mm measure?

It is the outside diameter of the acrylic tube. The end caps are 66 mm across, and the selected overall length includes both caps.

Does the reservoir come with a pump?

The box contains the reservoir and its mounting hardware and plugs. Supply your own pump for the loop.

How many ports does it have?

One end cap has three ports and the opposite cap has one. The ports use G1/4 fittings.

Can I remove the end caps for cleaning?

Yes. Both end caps can be removed to reach the inside of the reservoir.