360mm Radiator Option | Bykski CR-RDRC-TK60-V2, 60mm Thick (Also in 120/240/480mm)

Bykski · RC Series TK60-V2

60 mm Radiator for Custom PC Water Cooling

The Bykski RC TK60-V2 is a 60 mm-thick radiator that transfers heat from coolant to the air in a custom PC water cooling loop. It uses 120 mm fans and connects to the loop through two G1/4 ports. Choose a length based on your case's radiator mount and the space available for the radiator and fans together.

Thickness
60 mm
Fits
120 mm fans
Coolant ports
2 × G1/4

Compatibility

Match the radiator size to your case's 120 mm fan layout.

  • ✓120 mm radiator: 1 × 120 mm fan
  • ✓240 mm radiator: 2 × 120 mm fans
  • ✓360 mm radiator: 3 × 120 mm fans
  • ✓480 mm radiator: 4 × 120 mm fans

Compare the body dimensions below (length × width × thickness) with the space at your mounting position. Allow extra depth for the fans.

Key Specifications

120 mm sizeCR-RD120RC-TK60-V2
154 × 122 × 60 mm
240 mm sizeCR-RD240RC-TK60-V2
275.5 × 122 × 60 mm
360 mm sizeCR-RD360RC-TK60-V2
395.5 × 122 × 60 mm
480 mm sizeCR-RD480RC-TK60-V2
515.5 × 122 × 60 mm
FinishBlack
MaterialsRed copper and iron side plates
Coolant ports2 × G1/4
Mounting threadM3
Fin density14 fins per inch
Coolant channels14

Port end of the 360 mm model

Which Version Do I Need?

Choose by fan size first, then check how much depth your case has at the radiator mount.

TK60-V2 · 60 mmTHIS PAGE
Choose this version for a 120 mm fan layout with room for a 60 mm body plus fans.
Choose this version if you use 120 mm fans and need a shallower radiator.
Choose this white version for a 240, 360, or 480 mm mount with room for a 30 mm body plus 120 mm fans.
Choose this version for a 140, 280, or 420 mm radiator mount that takes 140 mm fans.

What's in the Box

1 × radiator in the selected sizeM3 mounting screws

Installation & Use

1
Clean the radiator before connecting it to the loop.
2
Mount the radiator and fans using screws that suit the installed thickness. Overlong screws can puncture the radiator and cause a leak.
3
Connect the radiator using G1/4 fittings and tubing.
4
Fill the loop, then check for leaks with only the pump powered. Leave the other PC components off during the test.

Have your 120 mm fans, G1/4 fittings, tubing, and coolant ready.

FAQ

How long is the 360 mm radiator?

The CR-RD360RC-TK60-V2 measures 395.5 × 122 × 60 mm and takes three 120 mm fans. Allow room for the 395.5 mm body at the mounting position.

What fittings do I need?

Use G1/4 fittings. The radiator has two threaded coolant ports.

Does the listed 60 mm include the fans?

The radiator body is 60 mm thick. Add the thickness of your fans when checking the available depth.

Notes
  • 1. In order to better use and maintain the radiator, please clean the radiator before use.
    Please note that it is normal to have a small amount of impurities in the radiator, which are some welding process residues left during manufacturing, etc.
    *If cleaning is not performed, the first pouring of coolant may cause some color contamination.
  • 2. Because during transportation, it is impossible to avoid the collision and backlog of packaging by external forces. We will also try to pack as tightly and solidly as possible.
    Please note that slight bending of the fins caused by the above-mentioned reasons is not covered by the warranty. If you mind, please purchase with caution.
    *They can be corrected using needle nose pliers
  • 3. Bykski reserves all right to modify and upgrade products, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.
    Generally speaking, we will arrange the latest version of the product for you.