14 mm OD Hard Tube 90° Elbow Fitting, Bykski B-HTJ-DB90-V2

Bykski · B-HTJ-DB90-V2

90° elbow for 14 mm hard tubing

The Bykski B-HTJ-DB90-V2 is a brass elbow fitting for custom PC water cooling loops. It joins two pieces of 14 mm outside-diameter rigid tubing at a right angle. Use it where you need the tubing to turn 90 degrees without bending the tube itself.

Fits
14 mm OD hard tubing
Angle
90°
Body
Brass

Fits

Use 14 mm OD rigid tubing on both ends.

Measure across the outside of each tube when checking fit.

Key Specifications

ModelB-HTJ-DB90-V2
Body materialBrass
Bend angle90°
Tube connections2 × 14 mm OD hard tube
Outer reach in side view30 mm
ColorsBlack, silver, white, gold

Dimensions and fitting views

Side-view dimensions are in millimeters.

What's in the Box

1, 4, or 8 elbow fittings, depending on the quantity selected

FAQ

Do both sides take tubing?

Yes. Both ends connect to 14 mm outside-diameter rigid tubing.

Do I have to bend the tube at this corner?

The elbow makes the 90° turn between two pieces of tubing, so you can use straight pieces on either side of the corner.

Notes
  • Use the dimension drawing to check clearance around the elbow before cutting your tubing.