ASUS RTX 4090 AIO Liquid Cooler, 360 mm (Select ROG Strix, TUF & Matrix) | Bykski B-FRD-AS4090STRIX

Bykski · B-FRD-AS4090STRIX

360 mm liquid cooling for select ASUS RTX 4090 cards

The Bykski B-FRD-AS4090STRIX is a 360 mm all-in-one GPU liquid cooler for the ASUS TUF Gaming RTX 4090 24GB, the listed ROG Strix RTX 4090 and 4090 D 24GB models, and the ROG Matrix Platinum RTX 4090 24GB. Its full-cover copper block replaces the original cooler and transfers heat from the GPU, memory, and power stages to a case-mounted radiator.

Fits
Listed ASUS RTX 4090 and ROG Strix RTX 4090 D cards
Radiator
360 mm aluminum
Cold plate
Nickel-plated T2 copper
Pump
Inline with the tubing

Compatibility

Bykski lists these ASUS board layouts.

  • ✓ASUS TUF Gaming GeForce RTX 4090 24GB
    TUF-RTX4090-24G-GAMING
  • ✓ASUS ROG Strix GeForce RTX 4090 24GB
    ROG-STRIX-RTX4090-24G-GAMING
  • ✓ASUS ROG Strix GeForce RTX 4090 24GB White OC Edition
    ROG-STRIX-RTX4090-O24G-WHITE
  • ✓ASUS ROG Strix GeForce RTX 4090 24GB OC Edition
    ROG-STRIX-RTX4090-O24G-GAMING
  • ✓ASUS ROG Matrix Platinum GeForce RTX 4090 24GB
    ROG-MATRIX-RTX4090-P24G-GAMING
  • ✓ASUS ROG Strix GeForce RTX 4090 D 24GB
    ROG-STRIX-RTX4090D-24G-GAMING

Verify your exact card model and PCB layout before ordering.

Design Highlights

Full-cover contact across the card

The T2 copper cold plate contacts the GPU, memory, and power stages through their thermal interfaces. The coolant passes through 0.3 mm jet microchannels in the plate.

Pump built into the tubing

The pump sits between the GPU block and radiator in the braided tubing. The standard 360 mm assembly connects the block, pump, and radiator in one loop.

Three fans across the 360 mm radiator

The standard 360 mm assembly has three fans on an aluminum radiator with 12 coolant channels. Check the space for the radiator, fans, and hose bends at the case mount.

Key Specifications

Model familyB-FRD-AS4090STRIX
Cooler typeAll-in-one GPU liquid cooler
Cold plateNickel-plated T2 copper
Cold plate conductivity401 W/(m·K), copper material value
Microchannels0.3 mm, up to 44 coolant channels
Block assembly dimensions222.30 × 119.58 × 16.60 mm
Radiator360 mm aluminum, 12 coolant channels
Radiator length396 mm in the manufacturer’s standard 360 mm drawing
Fans3 on the standard 360 mm assembly
Fan specs in the Bykski illustration3,008 RPM (±10%), up to 105.5 CFM and 5.27 mmH₂O, 45.6 dBA
Inline pump specifications7,000 RPM, 450 L/h, 7 m head
TubingBraided tubing

GPU block dimensions in mm (Bykski drawing)

Which Version Do I Need?

Check the full model on your card label. The ASUS TUF Gaming GeForce RTX 4090 OG and ASUS ROG Strix LC GeForce RTX 4090 24GB have a separate Bykski kit.

Bykski B-FRD-AS4090STRIXTHIS PAGE
Choose this kit for a model in the compatibility list above, such as the standard TUF Gaming RTX 4090 or the listed ROG Strix 24GB and White OC models.
Check the card label for TUF-RTX4090-24G-OG-GAMING or ROG-STRIX-LC-RTX4090-24G-GAMING. Confirm your PCB before ordering.

What's in the Box

1 GPU block and backplate assembly1 radiator with 3 fans1 inline pump with tubing5 thermal pad strips4 × 0.5 mm gaskets4 spring screws6 backplate screws

Contents shown for the standard 360 mm kit.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

ROG Matrix Platinum RTX 4090: ASUS advises against removing the factory liquid-metal cooler yourself. Contact ASUS Support or a qualified technician for help. The steps below cover the listed TUF and Strix cards.

Installation & Use

1
Shut the system down, disconnect power, and remove the graphics card and its original cooler.
2
Clean the GPU and board contact areas. Check that the block and PCB mounting holes line up.
3
Apply thermal pads to the memory and MOSFET contact areas and thermal paste to the GPU die.
4
Use the supplied gaskets and screws to secure the block and backplate.
5
Install the radiator and fans at a 360 mm case mount. The manufacturer illustrates a top mount. Leave room for the fans and route the hoses without sharp bends.
6
Connect the pump and fans to compatible power headers using the leads on your kit. Check for leaks at the connections and confirm the pump and fans run at startup.

You also need a case with a 360 mm radiator mount and enough space for the radiator, fans, and tubing. Have thermal paste for the GPU die and compatible connections for both the pump and the fans.

Bykski installation schematic. Dark areas mark the memory and MOSFET pad locations. Verify the contact areas on your own PCB and apply paste to the GPU die in the center.

FAQ

Is this a standalone water block for the ROG Strix RTX 4090?

The standard 360 mm kit includes a full-cover copper water block and backplate, plus a three-fan radiator and an inline pump connected by tubing.

Do I need to buy a separate pump?

The standard 360 mm kit includes a pump in the tubing between the block and radiator.

How do I know if the cooler will fit my case?

Look for a 360 mm radiator mount. The manufacturer’s standard 360 mm drawing shows a 396 mm radiator length. Allow room for the fans and hose bends as well.

Which RTX 4090 D does Bykski list?

Bykski lists the ASUS ROG Strix GeForce RTX 4090 D 24GB (ROG-STRIX-RTX4090D-24G-GAMING). Verify the exact model on your card, its PCB layout, and whether the block’s mounting holes line up. Contact FormulaMod if you need help confirming fit.

Where do I apply the thermal pads and paste?

For the listed TUF and Strix cards, apply pads to the memory and MOSFET contact areas shown in the mounting guide. Put thermal paste on the GPU die.

Notes
  • Check the mounting holes before tightening. If they do not line up, stop and verify the PCB.
  • The ASUS ROG Matrix Platinum RTX 4090 uses a factory liquid cooler and liquid metal on the GPU.
  • For any questions, please contact customer service.