Description
The Bykski B-FRD-RTX5090FE is an all-in-one liquid cooler for the NVIDIA GeForce RTX 5090 Founders Edition with 32 GB of GDDR7 memory. It replaces the card’s factory air cooler with a full-cover water block and backplate. In the standard kit, an inline pump sends coolant to a case-mounted radiator, so you can liquid-cool the card without building a custom loop.
For the Founders Edition PCB
Match the location of the GPU, power connector, and mounting holes to the bare-board photo. Verify your exact PCB layout before ordering.
The standard kit uses a 360 mm aluminum radiator and three 120 mm fans. The radiator is 396 mm long, so check the space around the mount as well as the mounting pattern.
A nickel-plated T2 copper cold plate draws heat from the GPU, memory, and power stages. Coolant passes through 0.3 mm jet microchannels.
The pump sits between the radiator and block, with braided EPDM tubing on either side. The loop comes assembled and filled.
| Standard kit model | B-FRD-RTX5090FE-360 |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Microchannels | 0.3 mm jet microchannels |
| Coverage | GPU, memory, and power stages |
| Radiator | 360 mm mount, 396 mm overall length, 38 mm radiator depth, aluminum with 12 coolant channels |
| Depth with fans | 63 mm |
| Fans | 3 × 120 mm |
| Inline pump | 7,000 RPM, 450 L/h flow, 7 m head |
| Tubing | Braided EPDM |
Match the Founders Edition PCB first, then choose the cooling setup that fits your build.
For any other radiator option, confirm the case clearance and kit contents with us before ordering.
Contents shown for the standard 360 mm kit.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need a case with space for the radiator, fans, and tubing, plus your own GPU thermal paste.
The block fits the NVIDIA GeForce RTX 5090 Founders Edition PCB. Use the bare-board photo to check the layout before ordering.
Check for a 360 mm radiator mount, 396 mm of room along the mount, and 63 mm of depth for the radiator and fans together. Leave room for the tubing to bend toward the card.
The standard kit comes with the pump already connected and the loop filled. You can install it without buying a pump or filling the loop.
On the standard kit, it sits inline on the tubing between the radiator and the GPU block. Leave a clear path for it when routing the tubing.