NVIDIA A100 40GB PCIe AIO Liquid Cooler by Bykski B-FRD-TESLA-A100 (A30 24GB, CMP 170HX)

Bykski · B-FRD-TESLA-A100

All-in-one liquid cooling for the NVIDIA A100 40GB PCIe

The Bykski B-FRD-TESLA-A100 is an all-in-one liquid cooler for the specified NVIDIA A100 40GB PCIe, A30 24GB PCIe and CMP 170HX PCIe boards. Its full-cover block replaces the stock heatsink. The loop moves heat to a fan-cooled radiator, giving these passively cooled cards a cooling option in workstations with a suitable radiator mount.

Fits
A100 40GB PCIe / A30 24GB PCIe / CMP 170HX PCIe
Single-card designs
120 / 240 / 360 mm
Dual-card option
Thick 360 mm radiator
Cold plate
T2 copper

Compatibility

Bykski lists these PCB layouts

  • ✓NVIDIA Tesla A100 40GB PCIe (Tesla A100 40GB layout)
  • ✓NVIDIA A30 24GB PCIe (Tesla A30 layout)
  • ✓NVIDIA CMP 170HX PCIe (170HX layout)

Check your exact card model and PCB layout against Bykski’s compatibility information before ordering.

NVIDIA A100 40GB PCIe card with its stock passive heatsink.

Design Highlights

An inline pump circulates the coolant

Braided hoses connect the full-cover block to the radiator, with the pump mounted inline. The radiator fans move air through the fins to carry heat out of the loop.

T2 copper at the card

The shaped cold plate mates with the PCB at the GPU and the surrounding contact points. The backplate mounts behind the board.

Jet microchannels under the GPU

Coolant passes through fine channels in the cold plate. The channels increase the copper surface area in contact with the coolant.

Key Specifications

ModelB-FRD-TESLA-A100
Cold plateT2 copper, rated by Bykski at 401 W/(m·K)
Jet microchannels0.3 mm, up to 44 channels
Block size257.39 × 95.84 × 18 mm (standard single-card drawing)
120 mm single-card radiator156 mm end to end in Bykski’s drawing
240 mm single-card radiator276 mm end to end in Bykski’s drawing
360 mm single-card radiator396 mm end to end in Bykski’s drawing
Standard 360 mm radiator designAluminum, 12 coolant channels
Pump to block360.93 mm in the standard single-card drawings
Radiator to pump70 mm in the standard single-card drawings

Standard single-card block dimensions in mm, from Bykski.

Which Version Do I Need?

For an all-in-one cooler, start with the number of cards and check your case’s radiator mount. If you already have a custom loop, choose a standalone block for your PCB.

B-FRD-TESLA-A100 AIOTHIS PAGE
For one card, choose the standard 360 mm kit. For two compatible cards, choose the B-FRD-TESLA-A100-360-H thick-radiator kit. For a mixed pair, confirm the exact card combination before ordering. Bykski’s drawings also show 120 mm and 240 mm single-card designs.
The newer Bykski standalone block and backplate. Its fit list covers A100 40GB, A30 24GB, and CMP 170HX 8GB. Check your board against the SR compatibility list.
Standalone block for a custom-loop build with the A100 40GB PCB.

The Astralcooler AC-WB1-GA100 is a standalone block listed by Astralcooler for A100 40GB, CMP 170HX, and A30 24GB. Check your PCB against Astralcooler’s compatibility information.

Bykski lists separate AIO models for the A100 80GB and A30X 24GB.

What's in the Box (Standard Single-Card Kits)

GPU water block and backplateRadiator, inline pump and tubing assemblyRadiator fans

Bykski’s single-card drawings show one fan for 120 mm, two for 240 mm, and three for 360 mm.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Shut down and unplug the system. Remove the card and its stock heatsink, then clean off the old thermal material.
2
Place thermal pads at the contact points specified for your PCB. Apply thermal paste to the GPU contact surface.
3
Align the block and backplate with the PCB. Use the specified spacers, insulating washers and screws. Stop and check the fit if a part catches or the board bends.
4
Mount the radiator and fans, then route the hoses without kinks. Match the pump and fan leads to the power connections specified by your hardware manuals.
5
Power only the pump for the leak check, with the rest of the system off. Reconnect the system and verify that the pump and fans run before putting the card under load.

You’ll also need a case with a matching radiator mount and room for the fans and tubing, basic installation tools, and the correct thermal pads and paste.

Bykski’s case illustration shows a top-mounted radiator and the hose route to the GPU.

FAQ

How do I water-cool an A100 40GB PCIe or CMP 170HX?

For the PCIe board layouts Bykski lists, the full-cover block replaces the stock passive heatsink. The inline pump moves coolant between the block and the fan-cooled radiator.

Do I need to buy a separate pump?

The AIO has an inline pump and its own radiator and tubing. A standalone block needs a custom loop with a pump, radiator, fittings, tubing, and coolant. A reservoir is common in a custom loop.

What does the -360-H option mean?

It is the 360 mm thick-radiator option for cooling two compatible cards. Check the available radiator and fan clearance in your case before choosing it.

How do I know if it fits my case?

Check the case’s radiator mounts, clearance for the radiator and fans, and the hose path to the GPU. Bykski illustrates a top mount.

Which A100 form factor should I check for?

Look for the A100 40GB PCIe card and verify its PCB. NVIDIA lists the HGX A100 SXM module as a separate form factor.

Notes
  • For any questions, please contact customer service.