PELADN RTX 4090 24GB AIO Liquid Cooler, 360 mm | Bykski B-FRD-PL4090

Bykski · B-FRD-PL4090

360 mm AIO liquid cooling for the PELADN RTX 4090

The Bykski B-FRD-PL4090 is an all-in-one liquid cooler that replaces the stock cooler on a compatible PELADN GeForce RTX 4090 24GB. Its full-cover copper block draws heat from the GPU, memory, and power stages. Coolant carries that heat to a 360 mm radiator.

Fits
PELADN GeForce RTX 4090 24GB
Radiator
360 mm
Cold plate
Copper
Options
Single-card or dual-card

Compatibility

Graphics card listed by Bykski

  • ✓PELADN GeForce RTX 4090 24GB

Before ordering, confirm that your exact PCB revision is supported by the kit you select.

Design Highlights

Full-cover copper cold plate

The copper cold plate covers the GPU, memory, and power stages.

0.3 mm jet microchannels in the B-FRD-PL4090-360 drawing

Bykski’s single-card drawing shows fine channels that increase the surface area where coolant picks up heat from the cold plate.

Single-card loop

Bykski’s B-FRD-PL4090-360 assembly drawing shows the inline pump between the GPU block and the radiator, connected by braided tubing.

Key Specifications

ModelBykski B-FRD-PL4090
Cooling coverageGPU core, memory, and power stages
Cold plateCopper
Jet microchannels0.3 mm (B-FRD-PL4090-360 single-card factory drawing)
Block assembly290.09 × 126.33 × 17.50 mm (single-card drawing)
Radiator class360 mm
Included radiator fans3 × 120 mm, each 25 mm thick (both kits)
Radiator thickness with fans63 mm for both kits (38 mm radiator + 25 mm fans)
Single-card pumpInline
Single-card tubingBraided tubing

Single-card block assembly dimensions in mm

Which Version Do I Need?

Match the card’s PCB first, then choose the kit for your card count. Both kits are 63 mm thick with the fans fitted.

PELADN RTX 4090 · B-FRD-PL4090-360THIS PAGE
Choose this kit for one matching PELADN card. It includes one GPU block and one matching backplate.
PELADN RTX 4090 · B-FRD-PL4090-360-HTHIS PAGE
Choose this kit for two matching PELADN cards. It includes two GPU blocks and two matching backplates. Check radiator clearance and tubing reach for both cards.
For a Leadtek GeForce RTX 4090 that matches the PCB listed on that product page.
For an NVIDIA GeForce RTX 4090 D 24GB. Verify that your card matches the PCB layout specified by Bykski before ordering.

What's in the Box

B-FRD-PL4090-360: 1 GPU block and 1 matching backplateB-FRD-PL4090-360-H: 2 GPU blocks and 2 matching backplatesBoth kits: 1 × 360 mm radiator, pump, tubing, and 3 × 120 mm fansBoth kits: mounting hardware and thermal pads

Both kits arrive with the tubing connected and coolant already filled.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Shut down and unplug the system. Remove the stock GPU cooler, then clean off any remaining thermal material.
2
Place thermal pads on the memory and power stages according to the instructions for your exact PCB revision. Apply your own GPU thermal paste to the GPU die.
3
Align the block with the PCB mounting holes and secure it. Install the supplied backplate according to the kit instructions.
4
Mount the radiator and fans at a supported 360 mm position in the case. Allow 63 mm of clearance for the radiator and fans, and check the full radiator length and tubing reach before tightening the mount.
5
Connect the pump and fan leads according to the cable labels and your motherboard instructions. At startup, confirm that the pump and fans run and check the tubing connections for leaks before putting the GPU under load.

You’ll also need GPU thermal paste and a screwdriver that fits the included mounting hardware. Check the thermal pad requirements for your exact PCB before removing the original cooler.

FAQ

Do I need to buy a pump or add coolant?

Both kits include a pump and arrive prefilled with the tubing connected.

Will the 360 mm kit fit my case?

Look for a 360 mm radiator mount with 63 mm of clearance for either kit. Check overall radiator length and tubing reach before ordering. Current kits ship with the 38 mm radiator; total thickness with fans is 63 mm (older drawings may show 52 mm).

What does the -H suffix mean?

B-FRD-PL4090-360-H pairs two GPU blocks and two matching backplates with one 360 mm radiator. Each card needs the supported PELADN PCB layout.

Is the GPU die the only area the block cools?

The full-cover block also cools the memory and power stages.

Notes
  • If the block fails to line up with the mounting holes, stop and have a technician check the fit before tightening the screws.