RTX A4000 AIO Liquid Cooler with Full-Cover Water Block by Bykski (B-FRD-RTXA4000)

Bykski · B-FRD-RTXA4000

360 mm AIO liquid cooling for the Leadtek RTX A4000

The Bykski B-FRD-RTXA4000 is a 360 mm all-in-one liquid cooler for the Leadtek NVIDIA RTX A4000 16GB workstation card. Its full-cover water block replaces the stock air cooler and transfers heat from the GPU core, memory, and power stages to a case-mounted radiator. The pump is already connected in the tubing.

Fits
Leadtek RTX A4000 16GB (Ampere)
Radiator
360 mm class
Cold plate
T2 copper
Pump
Inline

Compatibility

Confirmed graphics card

  • ✓Leadtek NVIDIA RTX A4000 16GB (Ampere, single-slot PCIe card with its original cooler)

Use the bare-board photo in the product gallery to compare component placement and mounting holes. Verify your exact card and PCB before ordering.

Leadtek RTX A4000 with its factory cooler.

Design Highlights

Move heat to a case-mounted radiator

The standard 360 mm kit pairs an aluminum radiator with three fans. The case mount needs room for both the radiator and the fans.

T2 copper over the GPU, memory, and power stages

The cold plate uses 0.3 mm jet microchannels. Bykski lists the T2 copper base material at 401 W/(m·K).

The pump sits in the tubing

The inline pump circulates coolant between the block and radiator through braided tubing. Check that the pump and tubing clear nearby components when planning the route.

Key Specifications

Standard modelB-FRD-RTXA4000-360
Dual-card optionB-FRD-RTXA4000-360-H
Cold plateT2 copper
Channel design0.3 mm jet microchannels
GPU block size (standard kit)221.98 × 98.43 × 18.00 mm
Radiator360 mm class; aluminum on the standard kit
Fans (standard kit)3 radiator fans
Pump and tubing (standard kit)Inline pump with braided tubing

Standard GPU block dimensions in millimeters.

Which Version Do I Need?

Check for the A in RTX A4000. The RTX 4000 Ada Generation and RTX 4000 SFF Ada Generation are separate NVIDIA models.

B-FRD-RTXA4000-360THIS PAGE
Choose the standard 360 mm AIO for one matching card when you want the pump, radiator, and GPU block in one assembly.
B-FRD-RTXA4000-360-HTHIS PAGE
Choose the thick-radiator option for a dual-card build. Check both PCBs and the available radiator clearance before ordering.
Choose this full-cover block with backplate for the same Leadtek PCB if you already have or plan to build a custom cooling loop.

What's in the Box

GPU water block, radiator, inline pump, and tubing assembly3 radiator fans

The items above describe the standard 360 mm kit.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Power off the workstation. Remove the card and its original cooler, then clean away the old thermal material.
2
Check that the block lines up with the PCB mounting holes. Fit the specified thermal pads to the memory and power stages. Apply your own GPU thermal paste to the GPU die.
3
Align the block and mounting holes, then secure it evenly with the specified hardware. If the holes or contact points do not line up, stop and recheck the PCB.
4
Install the card and mount the radiator and fans at the case’s 360 mm mount. Route the tubing without kinks and leave room for the inline pump.
5
Connect the pump and fans to the appropriate power connections for the supplied kit. At startup, confirm that the pump and fans are running before putting the card under load.

You also need a case with a 360 mm radiator mount, room for the radiator and fans, suitable power connections for the pump and fans, and your own GPU thermal paste.

Example with the radiator mounted at the top of the case.

FAQ

Is this the RTX A4000 water block or the complete cooler?

This is the all-in-one cooler. The standard kit comes with a full-cover GPU block, radiator, and inline pump already connected by tubing, so you can install it without building a custom loop.

What cooling does the RTX A4000 use from the factory?

The Leadtek RTX A4000 16GB is an actively air-cooled workstation card. This kit replaces its factory cooler and moves heat to a radiator mounted in the case.

Will this fit my workstation case?

Look for a 360 mm radiator mount and measure the space for the radiator with fans. Check that the tubing reaches the card with room for the inline pump.

What does the -H suffix mean?

B-FRD-RTXA4000-360-H is the thick-radiator option for a dual-card build. B-FRD-RTXA4000-360 is the standard single-card kit.

Notes
  • The cooler illustrations show the standard single-card configuration.